Global leader in innovative fastening technologies and solutions, PennEngineering® will exhibit a unique integration of its PEMSERTER® Series 3000™ Automatic-feed Fastener Installation Press and Universal Robot’s UR5 Collaborative Industrial Robot at Blechexpo, Stuttgart, on stand 4313 between 7th and 10th November 2017. Continue reading
LAS VEGAS, NV – PennEngineering® (Danboro, PA) has initiated a federal infringement action against Dongguan Fenggang Pinconn Hardware Factory (trading as “Pinconn”). The complaint alleges patent infringement, trademark infringement, false designation of origin, and counterfeiting under United States law, as well as common law trademark infringement and unfair competition.
New PEM® S-RT™ self-clinching free-running locknuts from PennEngineering® feature a modified thread angle enabling easier tightening of mating screws and superior vibration-resistant locking performance in thin metal assemblies. The modified thread formation allows mating screws to spin freely during the attachment process until clamp load is induced during the screw-tightening process. Continue reading
PennEngineering®, a global leader in fastening technologies, has expanded operations in Galway, Ireland, with a new 80,000-square-foot manufacturing and research facility. The new facility becomes the primary manufacturing site for all PEM® self-clinching fastener products sold throughout Europe. In addition, the site houses a newly created Research and Development Center and an Application Engineering Center providing all-encompassing custom fastener and installation design and test capabilities. Continue reading
PEMSERT® self-clinching flush nuts from PennEngineering® ideally suit attachment applications where a thin metal sheet requires load-bearing threads stronger than tapped holes but must remain flat without any protrusions on either side of the sheet. They can be installed before sheet bending and forming to provide threads for mating hardware in sections that otherwise would be inaccessible for fastener installation after chassis are formed. Their uniquely designed hexagonal head and clinch technology ensures high axial and torsional strength in service. Ultimately, the nuts install permanently, will never loosen or fall out, and leave surfaces unmarred to enhance the functional and cosmetic qualities of assemblies. Continue reading
PEM® FHL™ and FHLS™ self-clinching flush-head studs from PennEngineering® feature a unique low-displacement head design enabling close-to-edge installation of the fasteners in thin metal sheets. The studs provide ideal attachment solutions compared with weld studs and other conventional hardware by promoting easier and cleaner installation with fewer production steps and more reliable performance in service. Since the studs install permanently, they will never loosen or fall out over time.
New PEM® SMTSSS™ ReelFast® SNAP-TOP® standoff fasteners from PennEngineering® hold printed circuit boards securely in assemblies without requiring mating screws or other loose threaded hardware to complete attachment. These unthreaded standoffs promote streamlined production by easily installing in boards in the same manner and at the same time as other surface mount components prior to the automated reflow solder process. They ultimately enable precise and reliable mounting and spacing of boards using less hardware and fewer operations.
DANBORO, PA, USA, July 20, 2017 – Rocky Pinheiro has joined PennEngineering® as Global Vice President of Quality, it was announced today by the Company. Pinheiro will be responsible for driving enterprise-wide quality systems improvement, excellence, and evolution and will function as a corporate source matter expert with PennEngineering’s established quality teams in each plant and selling organization.