HFLH-0420-16X
Type HFLH™ Hard Panel Studs
HFLH-0420-16X
Type HFLH™ Hard Panel Studs
- Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Lighter weight
- Close to edge of panel mounting
- No embossing required
- Hardened stud material provides stronger thread strength
- Can be installed automatically using press or in-die technology
规格
- 螺纹代码
- 0420
- 螺纹尺寸
- .250-20 (1/4-20)
- 螺纹规格
- 2A, ASME B1.1
- 紧固件材质
- Hardened Medium Carbon Alloy Steel
- 标准表面处理
- No Finish (with Rust Preventative Oil)
- 适用板材硬度
- HRB 96 / HB 216 or Less
- 产品类型
- Type HFLH™ Hard Panel Studs – Unified
- 螺纹类型
- External
- PEM产品系列
- HFLH
- 产品类型
- 螺钉
- H ± .01_in
- 0.462in
- Hole Size in Sheet +.005 – .000_in
- 0.25in
- Hole Size in Sheet + 0.13_mm
- mm
- L Len Pm 015英寸/4毫米
- 1in
- L ± 0.4_mm
- mm
- 最小值 孔 C/L 至边缘的距离_in
- 0.47in
- S 最大_英寸
- 0.118in
- T 最大_in
- 0.06in
安装&性能数据
| Type | Thread Code | Installation (lbs.) | Anvil Dim A (in.) | Anvil Dim C (in.) | Haeger Anvil For Sheet .040 to .060 (in.) | Haeger Anvil For Sheet > .060 (in.) | Haeger Punch | Pemserter Anvil For Sheet .040 to .060 (in.) | Pemserter Anvil For Sheet > .060 (in.) | Pemserter Punch | PULL THRU (lbs.) | Pushout (lbs.) | REC. NUT TIGHTENING TORQUE (ft. lbs.) | SHEET HARDNESS HRB | TENSILE STRENGTH (lbs.) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS | TEST SHEET THICKNESS & MATERIAL | Torque-out (in. lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HFLH | 420 | 13500 | .295 – .300 | .250 – .253 | H-103-04LC | H-103-04L | H-108-0020L | 8003702 | 970200010300 | 8003708 | 3600 | 340 | 10 | 89 | 3820 | 0.335 | .040″ HC500LA | 130 |
库存
| 代理商 | 数量 | 联系方式 | 电话 | 地址 | 地点 |
|---|