FH-632-20ZC

Self-Clinching Threaded Studs – Type FH/FHS/FHA

FH-632-20ZC

Self-Clinching Threaded Studs – Type FH/FHS/FHA

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order.- Flush-head in designated minimum sheet thickness or greater.

  • Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.
  • Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.
  • Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” scale) 50 or less and HB (Hardness Brinell) 82 or less.

Specifications

Gewinde Code
632
Thread Size
#6-32
Thread Specification
2A, ANSI B1,1, Extern
Fastener Material
Karbonstahl, Wärmebehandelter Karbonstahl
Optional Finish
SC1 (5µm), Typ II, gelb, Verzinkt nach ASTM B633
For Use in Sheet Hardness
HRB 80 / HB 150 or less
Length Code
20
Product Category
Self-Clinching Threaded Studs – Type FH/FHS/FHA
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103708
PEM Product Family
FH
Unit (Metric/Unified)
einheitlich
H ± .015_in
.206in
Hole Size in Sheet + .003 – .000_in
.137in
L Len Pm 015in Or 4mm
1,25in
Max. Hole in Attached Parts_in
.160in
Min. Dist. Hole C/L to Edge_in
.250in
Min. Sheet Thickness_in
.040in
S Max._in
.090in

Resources

Installation & Performance Data

fh-fh-fhs-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.)
FH 632 14 .064" Aluminum 29 3800 180 17 850
FH 632 14 .060" Steel 59 4700 300 20 850

Inventory

Vertriebspartner Quantity Kontakt Telefonnummer Adresse Bürostandorte

Suche

Wonach Suchen Sie?

Sie können unsere Website auf verschiedene Weise durchsuchen. Sie können nach Bestands- oder Produktspezifikationen suchen, indem Sie die vollständige Teilenummer oder einen Teil der Teilenummer verwenden. Sie müssen nicht einmal die Wörter "Inventar" oder "Produktspezifikationen" eingeben.
Beispiele für die Eingabe:
Vollständige oder teilweise Teilenummer: “S-632-1ZI”, “CLS 632” Typ: “CLS”, “FH”, “SO” Inhalt der Website: “Einpressmutter” oder “PEM bolzen”