HFLH-M8-30ZI
Type HFLH™ Hard Panel Studs
HFLH-M8-30ZI
Type HFLH™ Hard Panel Studs
- Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Lighter weight
- Close to edge of panel mounting
- No embossing required
- Hardened stud material provides stronger thread strength
- Can be installed automatically using press or in-die technology
Specifications
- Gewinde Code
- M8
- Thread Size
- M8 x 1.25
- Thread Size X Pitch
- M8 x 1,25
- Thread Specification
- 2A / ASME B1,13M, 6g, ASME B1,13M, Extern
- Fastener Material
- Legierter Stahl, Wärmebehandelter legierter Stahl
- Standard Finish
- farblos, SC1 (5µm), Typ III, Verzinkt nach ASTM B633, Zink plus Klar-Chromat
- For Use in Sheet Hardness
- HRB 96 / HB 216 or Less
- Length Code
- 30
- Tensile strength_MPa
- 900
- Product Category
- Type HFLH™ Hard Panel Studs
- CAD Supplier
- PennEngineering® (PEM®)
- CADPartID
- 110706
- Application Type
- Luft- und Raumfahrt, Automobil, Kfz-Elektronik, Nutzfahrzeuge, Datenkommunikation, Ladegeräte für Elektrofahrzeuge, Elektrofahrzeuge, Elektronik, Industriell, Fertigung; Blechverarbeitung, Marine, Medizinisch, Erneuerbare Energie, Telekommunikation
- Base Panel Material
- Harter Stahl
- Brand
- PEM
- Fastener Characteristics
- Innengewinde
- Industry
- Automobil, Kfz-Elektronik, Datacom und Telekommunikation, Elektrofahrzeuge, Industriell; Kommerziell, Medizinisch
- Installation Equipment/Method
- C-Frame Automatischer Vorschub / Feed, C-Rahmen Manueller Vorschub / Feed, Vollautomatische Verarbeitung
- PEM Product Family
- FH
- Product Type
- Nieten
- Technology Type
- Selbst-einpressend
- Unit (Metric/Unified)
- metrisch
- H Plus Minus 025 Mm
- 15,3mm
- Hole Size in Sheet + 0.13_mm
- 8mm
- L Len Pm 015in Or 4mm
- 30mm
- Max. Hole in Attached Parts_mm
- 10.3mm
- Min. Dist. Hole C/L to Edge_mm
- 14.5mm
- Min. Sheet Thickness_mm
- 1.5mm
- S Max._mm
- 3.3mm
- T Max._mm
- 2.13mm
Resources
Installation & Performance Data
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL-THRU (kN) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS |
---|---|---|---|---|---|---|---|---|---|---|
HFLH | M8 | 26 | 1.5 mm HC500LA | 91 | 71.1 | 2400 | 33.9 | 32.9 | 27.5 | 10.3 |
Inventory
Vertriebspartner | Quantity | Kontakt | Telefonnummer | Adresse | Bürostandorte |
---|