LAS-M4-2MD
Floating self-clinching, locking thread fasteners LA4, LAC, LAS
LAS-M4-2MD
Floating self-clinching, locking thread fasteners LA4, LAC, LAS
Locking and Non-locking Threads These fasteners provide load-bearing threads in thin sheets and permit up to 0.76mm adjustment for mating hole misalignment.
The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place.
Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque performance is equivalent to applicable NASM25027 specifications.
Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets as thin as 0.97mm with hardness up to HRB 88 on the Rockwell “B” scale.
Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).
Especificaciones
- Código de rosca
- M4
- Tamaño de rosca
- M4 x 0.7
- Tamaño de rosca X paso
- M4 x 0.7
- Especificación de rosca
- 6H, ANSI/ASME B1.13M, Interno
- Código del vástago
- 2
- Material del inserto
- Acero al carbono, Acero
- Fastener Materials – Nut
- 300 Series Stainless Steel
- Fastener Materials – Retainer
- Heat-Treated Carbon Steel
- Nut Finish
- Black Dry-film Lubricant
- Retainer Finish
- Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
- Para uso en láminas de dureza
- HRB 70 / HB 125 or Less
- Float
- 0.38mm minimum, in all directions from center, 0.76mm total
- Categoría del producto
- Floating self-clinching, locking thread fasteners LA4, LAC, LAS
- Proveedor CAD
- PennEngineering® (PEM®)
- Identificación de pieza CAD
- 103681
- Tipo de rosca
- Self-Locking
- Tipo de aplicación
- Industrial, Manufactura y fabricación de láminas de metal
- Material del panel base
- Aluminio, Acero
- Marca
- PEM
- Características del inserto
- Flotantes, De bloqueo, Roscado interno
- Industria
- Industrial y comercial
- Equipo/método de instalación
- Alimentador automático con soporte en C, Alimentador manual con soporte en C
- Producto de la familia PEM
- ALA, LN
- Tipo de producto
- Tuercas
- Tipo de tecnología
- Auto-clinchado
- Unidad de medición
- Métrico
- A Vástago máx
- 1.38mm
- E ± 0.38_mm
- 11.18mm
- Tamaño del orificio en la lámina + 0.08_mm
- 9.35mm
- Dist. Mín orificio cercano al borde_mm
- 8.64mm
- Min. Sheet Thickness_mm
- 1.38mm
- C Máx._mm
- 9.33mm
- D Max._mm
- 9.28mm
- T1 Max._mm
- 3.31mm
- T2 Max._mm
- 5.34mm
Recursos
Datos de instalación y rendimiento
| TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | RETAINER PUSHOUT (N) | RETAINER TORQUE-OUT (N•m) |
|---|---|---|---|---|---|---|
| AC, AS, LAS, LAC | M4 | 1 | 5052-H34 Aluminum | 8.9 | 1112 | 15.8 |
| AC, AS, LAS, LAC | M4 | 2 | 5052-H34 Aluminum | 8.9 | 1178 | 16.9 |
| AC, AS, LAS, LAC | M4 | 1 | Cold-Rolled Steel | 13.3 | 1334 | 16.9 |
| AC, AS, LAS, LAC | M4 | 2 | Cold-Rolled Steel | 13.3 | 1779 | 22.6 |
| TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | RETAINER PUSHOUT (N) | RETAINER TORQUE-OUT (N•m) | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| LAS, LAC | M4 | 1 | 2024-T3 Aluminum | 13.3 | 1067 | 12.4 | ||||
| LAS, LAC | M4 | 2 | 2024-T3 Aluminum | 15.6 | 1334 | 16.9 | ||||
| LAS, LAC | M4 | 1 | 5052-H34 Aluminum | 8.9 | 1112 | 15.8 | ||||
| LAS, LAC | M4 | 2 | 5052-H34 Aluminum | 8.9 | 1178 | 16.9 | ||||
| LAS, LAC | M4 | 1 | Cold-Rolled Steel | 13.3 | 1334 | 16.9 | ||||
| LAS, LAC | M4 | 2 | Cold-Rolled Steel | 13.3 | 1779 | 22.6 |
Inventario
| Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
|---|