TFH-832-20ZC
Non-Flush Studs – Types TFH, TFHS
TFH-832-20ZC
Non-Flush Studs – Types TFH, TFHS
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
TFH (non-flush) Studs are for sheets as thin as .020 inches. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however, different punches and anvils are required. When installed, the TFH stud will be securely locked into the thin sheet with ample torque-out and pushout resistances. The stud head will not be flush but will project above the sheet surface approximately .025 in.- Non-flush for sheets as thin as .020”.
- Type TFH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
- Type TFHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
Especificaciones
- Código de rosca
- 832
- Tamaño de rosca
- #8-32
- Especificación de rosca
- 2A, ANSI B1.1, Externo
- Material del inserto
- Acero al carbono, Acero al carbono tratado térmicamente
- Acabado opcional
- SC1 (5µm), Tipo II, amarillo, Zincado según ASTM B633
- Para uso en láminas de dureza
- HRB 80 / HB 150 or less
- Length Code
- 20
- Categoría del producto
- Non-Flush Studs – Types TFH, TFHS
- Proveedor CAD
- PennEngineering® (PEM®)
- Identificación de pieza CAD
- 103712
- Tipo de aplicación
- Automotriz, Telecomunicaciones, Vehículos eléctricos, Telecomunicaciones
- Material del panel base
- Aluminio, Acero
- Marca
- PEM
- Características del inserto
- Roscado externo
- Industria
- Automotriz, Telecomunicaciones, Industrial y comercial
- Equipo/método de instalación
- Alimentador automático con soporte en C, Alimentador manual con soporte en C, Matriz del equipo
- Producto de la familia PEM
- FH
- Tipo de producto
- Pernos
- Tipo de tecnología
- Auto-clinchado
- Unidad de medición
- Unificado
- H ± .015_in
- .234in
- Hole Size in Sheet + .003 – .000_in
- .163in
- L Len Pm 015in o 4mm
- 1.25in
- Max. Hole in Attached Parts_in
- .183in
- Min. Dist. Hole C/L to Edge_in
- .281in
- Min. Sheet Thickness_in
- .020in
- S Max._in
- .070in
- T Max._in
- .025in
Recursos
Datos de instalación y rendimiento
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) | PULL THRU TEST BUSHING HOLE SIZE (in.) |
---|---|---|---|---|---|---|---|---|---|
TFH | 832 | 19 | .025" Aluminum | 41 | 2100 | 94 | 14 | 943 | .184 |
TFH | 832 | 21 | .022" Steel | 57 | 3500 | 111 | 23 | 1065 | .184 |
Inventario
Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
---|