BSOS-8632-32

Blind Threaded Standoffs – Types BSO, BSOA, BSOS

BSOS-8632-32

Blind Threaded Standoffs – Types BSO, BSOA, BSOS

These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes – and become permanently mounted in the thin sheet.

When blind-threaded types are used, outer sheet surfaces are not only flush, but c

Specifications

Thread Code
8632
Thread Size
#6-32
Thread Specification
2B, ANSI B1.1, Internal
Fastener Material
300 Series Stainless Steel
Material Code
S
Standard Finish
Passivated and/or tested
For Use in Sheet Hardness
HRB 70 / HB 125 or Less
Length Code
32
Product Category
Blind Threaded Standoffs – Types BSO, BSOA, BSOS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103728
Brand
PEM
PEM Product Family
SO
Product Type
Standoffs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Unified
C + .000 – .005_in
0.28in
F Min._in
0.375in
H Nom._in
0.312in
Hole Size in Sheet + .003 – .000_in
0.281in
L – Length +.002 –.005_in
1in
Min. Dist. Hole C/L to Edge_in
0.31in
Min. Sheet Thickness_in
0.05in

Resources

Installation & Performance Data

so-so-sos-soa-bso-bsos-bsoa-standoffs-unified
TYPE THREAD CODE STANDOFF MATERIAL MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) TEST SHEET MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL-THRU (lbs.)
SO,SOS,SOA,BSO,BSOS,BSOA 8632 Steel 8.75 .060" 5052-H34 Aluminum 2400 400 45 580
SO,SOS,SOA,BSO,BSOS,BSOA 8632 Stainless Steel 7 .060" 5052-H34 Aluminum 2400 400 45 464
SO,SOS,SOA,BSO,BSOS,BSOA 8632 Aluminum 5.25 .060" 5052-H34 Aluminum 2400 400 45 248
SO,SOS,SOA,BSO,BSOS,BSOA 8632 Steel 8.75 .060" Cold-Rolled Steel 4000 560 75 700
SO,SOS,SOA,BSO,BSOS,BSOA 8632 Stainless Steel 7 .060" Cold-Rolled Steel 4000 560 75 560
SO,SOS,SOA,BSO,BSOS,BSOA 8632 Aluminum 5.25 .060" Cold-Rolled Steel

Inventory

Distributor Quantity Contact Phone Address Locations

Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”