FHS-215-8
Self-Clinching Pins – Type FH, FHS, FHA
FHS-215-8
Self-Clinching Pins – Type FH, FHS, FHA
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
FH (flush-head) studs are available in aluminum, steel, or stainless steel . They are also available unthreaded on special order.- Flush-head for sheet thickness of .040” and greater.
- Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
- Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
- Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” Scale) 50 or less and HB (Hardness Brinell) 82 or less.
Specifications
- Fastener Material
- 300 Series Stainless Steel
- Standard Finish
- Passivated and/or tested, Passivated and/or tested per ASTM A380
- For Use in Sheet Hardness
- HRB 70 / HB 125 or Less
- Length Code
- 8
- Product Category
- Self-Clinching Pins – Type FH, FHS, FHA
- CAD Supplier
- PennEngineering® (PEM®)
- CADPartID
- 103720
- PEM Product Family
- FH
- P Nominal Pin Diameter
- .215in, 0.215in
- Unit (Metric/Unified)
- Unified
- H ± .015_in
- .340in
- Hole Size in Sheet + .003 – .000_in
- .250in
- L Len Pm 015in Or 4mm
- .500in, 0.5in
- Min. Dist. Hole C/L to Edge_in
- .31in
- Min. Sheet Thickness_in
- .062in
- Pin Dia. Code
- 215
- S Max._in
- .135in
Resources
Installation & Performance Data
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
---|---|---|---|---|---|---|---|---|
FH | M2.5 | 0.78 | 1.6 mm Aluminum | 29 | 8.9 | 465 | 1.0 | 2600 |
FHS | M2.5 | 0.48 | 1.6 mm Aluminum | 29 | 11.6 | 465 | 0.8 | 1820 |
FH | M3 | 1.1 | 1.6 mm Aluminum | 29 | 12.9 | 600 | 1.7 | 3150 |
FHS | M3 | 0.81 | 1.6 mm Aluminum | 29 | 12.9 | 600 | 1.3 | 2570 |
FH | M3.5 | 1.6 | 1.6 mm Aluminum | 29 | 15.6 | 800 | 1.7 | 3780 |
FHS | M3.5 | 1.3 | 1.6 mm Aluminum | 29 | 15.6 | 800 | 1.7 | 3445 |
FH | M4 | 2.1 | 1.6 mm Aluminum | 29 | 20 | 975 | 2.9 | 4448 |
FHS | M4 | 1.8 | 1.6 mm Aluminum | 29 | 22.3 | 975 | 2.9 | 4180 |
FH | M5 | 3.1 | 1.6 mm Aluminum | 29 | 24.5 | 1070 | 3.5 | 5170 |
FHS | M5 | 2.5 | 1.6 mm Aluminum | 29 | 24.5 | 1070 | 3.5 | 4760 |
FH | M6 | 7.3 | 2.4 mm Aluminum | 28 | 28.9 | 1660 | 7.3 | 10200 |
FHS | M6 | 5.7 | 2.4 mm Aluminum | 28 | 28.9 | 1660 | 7.3 | 9090 |
FH | M8 | 10 | 2.4 mm Aluminum | 28 | 29.8 | 1910 | 11.3 | 10500 |
FHS | M8 | 8 | 2.4 mm Aluminum | 28 | 29.8 | 1910 | 11.3 | 9540 |
FH | M2.5 | 0.84 | 1.5 mm Steel | 59 | 11.1 | 740 | 1.0 | 2800 |
FHS | M2.5 | 0.48 | 1.5 mm Steel | 59 | 13.8 | 740 | 0.8 | 1820 |
FH | M3 | 1.4 | 1.5 mm Steel | 59 | 14.7 | 820 | 1.7 | 3840 |
FHS | M3 | 0.77 | 1.5 mm Steel | 59 | 14.7 | 820 | 1.3 | 2440 |
FH | M3.5 | 1.6 | 1.5 mm Steel | 59 | 22.3 | 1335 | 2.8 | 3780 |
FHS | M3.5 | 1.3 | 1.5 mm Steel | 59 | 22.3 | 1335 | 2.0 | 3445 |
FH | M4 | 2.7 | 1.5 mm Steel | 59 | 28.9 | 1780 | 4.2 | 5650 |
FHS | M4 | 2 | 1.5 mm Steel | 59 | 26.7 | 1780 | 2.9 | 4775 |
FH | M5 | 3.8 | 1.5 mm Steel | 59 | 33.4 | 2000 | 6.5 | 6270 |
FHS | M5 | 3.2 | 1.5 mm Steel | 59 | 32.5 | 2000 | 6.3 | 6000 |
FH | M6 | 8.1 | 2.2 mm Steel | 46 | 44.5 | 2560 | 11.3 | 11300 |
FHS | M6 | 6.7 | 2.2 mm Steel | 46 | 44.5 | 2560 | 10.1 | 10600 |
FH | M8 | 15 | 2.4 mm Steel | 46 | 44.5 | 2890 | 19.2 | 15450 |
FHS | M8 | 11 | 2.4 mm Steel | 46 | 49.8 | 2890 | 17.5 | 13630 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
---|---|---|---|---|---|---|---|---|
FH | 256 | 4.4 | .062" Aluminum | 29 | 2000 | 100 | 5 | 425 |
FHS | 256 | 2.7 | .062" Aluminum | 29 | 2000 | 100 | 4.5 | 300 |
FH | 440 | 8.7 | .064" Aluminum | 29 | 3800 | 170 | 10 | 650 |
FHS | 440 | 5.9 | .064" Aluminum | 29 | 3200 | 170 | 8 | 500 |
FH | 632 | 14 | .064" Aluminum | 29 | 3800 | 180 | 17 | 850 |
FHS | 632 | 11 | .064" Aluminum | 29 | 3500 | 180 | 16 | 775 |
FH | 832 | 20 | .064" Aluminum | 29 | 4800 | 220 | 28 | 1000 |
FHS | 832 | 16 | .064" Aluminum | 29 | 4500 | 220 | 28 | 940 |
FH | 024/032 | 28 | .064" Aluminum | 29 | 5500 | 270 | 30 | 1220 |
FHS | 024/032 | 24 | .064" Aluminum | 29 | 5500 | 270 | 30 | 1220 |
FH | 0420 | 69 | .093" Aluminum | 28 | 6500 | 310 | 65 | 2300 |
FHS | 0420 | 55 | .093" Aluminum | 28 | 6500 | 310 | 65 | 2100 |
FH | 0518 | 85 | .093" Aluminum | 28 | 6500 | 430 | 100 | 2260 |
FHS | 0518 | 74 | .093" Aluminum | 28 | 6700 | 430 | 100 | 2260 |
FH | 256 | 4.4 | .060" Steel | 59 | 2500 | 180 | 5 | 425 |
FHS | 256 | 2.7 | .060" Steel | 59 | 2500 | 180 | 4.5 | 300 |
FH | 440 | 8.7 | .060" Steel | 59 | 4300 | 275 | 10 | 650 |
FHS | 440 | 5.9 | .060" Steel | 59 | 4700 | 275 | 8 | 500 |
FH | 632 | 14 | .060" Steel | 59 | 4700 | 300 | 20 | 850 |
FHS | 632 | 11 | .060" Steel | 59 | 5000 | 300 | 16 | 775 |
FH | 832 | 25 | .060" Steel | 59 | 6800 | 375 | 40 | 1270 |
FHS | 832 | 19 | .060" Steel | 59 | 5500 | 375 | 28 | 1130 |
FH | 024/032 | 32 | .060" Steel | 59 | 7500 | 450 | 60 | 1410 |
FHS | 024/032 | 28 | .060" Steel | 59 | 6800 | 450 | 50 | 1410 |
FH | 0420 | 77 | .088" Steel | 46 | 9500 | 575 | 100 | 2550 |
FHS | 0420 | 67 | .088" Steel | 46 | 10000 | 575 | 100 | 2550 |
FH | 0518 | 130 | .093" Steel | 46 | 10000 | 650 | 175 | 3475 |
FHS | 0518 | 102 | .093" Steel | 46 | 11200 | 650 | 175 | 3120 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
---|---|---|---|---|---|---|---|---|
FH4 | M3 | 1.3 | 1.5 mm Stainless Steel | 87 | 40 | 2220 | 1.8 | 3500 |
FH4 | M4 | 3.8 | 1.5 mm Stainless Steel | 86 | 50 | 3210 | 6.5 | 8000 |
FH4 | M5 | 6 | 1.5 mm Stainless Steel | 86 | 53 | 3560 | 10.7 | 10000 |
FH4 | M6 | 11 | 1.6 mm Stainless Steel | 88 | 100 | 4200 | 15.9 | 14900 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
---|---|---|---|---|---|---|---|---|
FH4 | 440 | 11 | .060" Stainless Steel | 87 | 9000 | 450 | 16 | 800 |
FH4 | 632 | 22 | .060" Stainless Steel | 87 | 9500 | 540 | 27 | 1350 |
FH4 | 832 | 35 | .060" Stainless Steel | 86 | 11200 | 780 | 58 | 1800 |
FH4 | 032 | 51 | .060" Stainless Steel | 86 | 12000 | 800 | 95 | 2250 |
FH4 | 0420 | 117 | .062" Stainless Steel | 88 | 23000 | 1600 | 156 | 3900 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HR15T | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
---|---|---|---|---|---|---|---|---|
FHA | M3 | 0.54 | 1.55 mm 5052-H34 Aluminum | 74 | 10.7 | 575 | 0.5 | 1500 |
FHA | M4 | 0.96 | 1.55 mm 5052-H34 Aluminum | 75 | 14.3 | 775 | 1.35 | 2000 |
FHA | M5 | 1.5 | 1.55 mm 5052-H34 Aluminum | 75 | 15.2 | 900 | 2.6 | 2500 |
FHA | M6 | 3.2 | 1.6 mm 5052-H34 Aluminum | 75 | 24.5 | 1500 | 5.3 | 4500 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HR15T | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
---|---|---|---|---|---|---|---|---|
FHA | 440 | 3.6 | .061" 5052-H34 Aluminum | 75 | 2500 | 155 | 4 | 270 |
FHA | 632 | 6.3 | .061" 5052-H34 Aluminum | 75 | 2600 | 180 | 8 | 380 |
FHA | 832 | 9.8 | .061" 5052-H34 Aluminum | 73 | 3200 | 190 | 15 | 500 |
FHA | 032 | 14 | .061" 5052-H34 Aluminum | 75 | 3200 | 220 | 28 | 600 |
FHA | 0420 | 32 | .062" 5052-H34 Aluminum | 75 | 5500 | 300 | 55 | 1050 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) | PULL THRU TEST BUSHING HOLE SIZE (mm) |
---|---|---|---|---|---|---|---|---|---|
FHL, FHLS | M2.5 | 0.32 | 1.2 mm Aluminum | 33 | 3.1 | 285 | 0.55 | 1200 | 3 |
FHL, FHLS | M3 | 0.41 | 1.2 mm Aluminum | 33 | 4.4 | 285 | 0.65 | 1300 | 3.5 |
FHL, FHLS | M3.5 | 0.51 | 1.2 mm Aluminum | 33 | 4.4 | 290 | 0.76 | 1400 | 4 |
FHL, FHLS | M4 | 0.65 | 1.2 mm Aluminum | 33 | 5.3 | 365 | 1.1 | 1550 | 4.5 |
FHL, FHLS | M5 | 0.97 | 1.2 mm Aluminum | 33 | 11.1 | 530 | 2.2 | 1850 | 5.5 |
FHL, FHLS | M2.5 | 0.59 | 1.1 mm Steel | 54 | 5.3 | 450 | 1.1 | 2250 | 3 |
FHL, FHLS | M3 | 0.79 | 1.1 mm Steel | 54 | 5.3 | 475 | 1.25 | 2500 | 3.5 |
FHL, FHLS | M3.5 | 1.03 | 1.1 mm Steel | 54 | 6.6 | 500 | 1.75 | 2800 | 4 |
FHL, FHLS | M4 | 1.39 | 1.1 mm Steel | 54 | 6.6 | 550 | 2.1 | 3300 | 4.5 |
FHL, FHLS | M5 | 1.97 | 1.1 mm Steel | 54 | 20 | 1000 | 4.4 | 3750 | 5.5 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) | PULL THRU TEST BUSHING HOLE SIZE (in.) |
---|---|---|---|---|---|---|---|---|---|
FHL, FHLS | 256 | 2.1 | .047" Aluminum | 33 | 700 | 55 | 4 | 230 | .106 |
FHL, FHLS | 440 | 3.5 | .047" Aluminum | 33 | 1000 | 60 | 5 | 300 | .132 |
FHL, FHLS | 632 | 4.7 | .047" Aluminum | 33 | 1000 | 65 | 6.5 | 325 | .158 |
FHL, FHLS | 832 | 6 | .047" Aluminum | 33 | 1200 | 80 | 9 | 350 | .184 |
FHL, FHLS | 032 | 7.9 | .047" Aluminum | 33 | 2500 | 115 | 18 | 395 | .210 |
FHL, FHLS | 256 | 3.8 | .045" Steel | 54 | 1200 | 85 | 8 | 425 | .106 |
FHL, FHLS | 440 | 6.8 | .045" Steel | 54 | 1200 | 105 | 11 | 580 | .132 |
FHL, FHLS | 632 | 9 | .045" Steel | 54 | 1500 | 110 | 15 | 650 | .158 |
FHL, FHLS | 832 | 13 | .045" Steel | 54 | 1500 | 125 | 18 | 740 | .184 |
FHL, FHLS | 032 | 16 | .045" Steel | 54 | 4500 | 210 | 38 | 800 | .210 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
---|---|---|---|---|---|---|---|---|
FHP | M3 | 1.3 | 2 mm Stainless Steel | 86 | 40 | 2500 | 1.6 | 3500 |
FHP | M4 | 2.9 | 1.14 mm Stainless Steel | 86 | 50 | 3000 | 3.9 | 6000 |
FHP | M5 | 4.4 | 1.14 mm Stainless Steel | 86 | 53 | 3560 | 7.35 | 7320 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
---|---|---|---|---|---|---|---|---|
FHP | 440 | 8.1 | .045" Stainless Steel | 86 | 9000 | 520 | 10.6 | 605 |
FHP | 632 | 16 | .045" Stainless Steel | 86 | 9500 | 670 | 19.5 | 940 |
FHP | 832 | 28 | .045" Stainless Steel | 86 | 11200 | 785 | 37.5 | 1415 |
FHP | 032 | 34 | .045" Stainless Steel | 86 | 12000 | 800 | 59.5 | 1500 |
TYPE | THREAD CODE | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | |||||
---|---|---|---|---|---|---|---|---|---|---|
FHX | X5 | 1.1 mm Steel HRB 58 / HB 104 | 24.9 | 1519 | 4.7 | |||||
FHX | X5 | 1.2 mm Aluminum HRB 44 / HB 66 | 19.2 | 1070 | 3.2 | |||||
FHX | X6 | 1.6 mm Steel HRB 58 / HB 104 | 35.6 | 2964 | 13.3 | |||||
FHX | X6 | 1.6 mm Aluminum HRB 44 / HB 66 | 29.4 | 1623 | 7 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL THRU (N) | PULL THRU TEST BUSHING HOLE SIZE (mm) |
---|---|---|---|---|---|---|---|---|---|---|
HFE | M5 | 5.8 | 1 mm Aluminum | 27 | 37.7 | 690 | 8.1 | 12.8 | 9.7 | 7.4 |
HFE | M6 | 10 | 1 mm Aluminum | 27 | 39 | 750 | 11.8 | 18.1 | 14.2 | 8.2 |
HFE | M8 | 24 | 1.5 mm Aluminum | 22 | 42 | 1230 | 23.5 | 32.9 | 25 | 10.3 |
HFE | M5 | 6.4 | 1 mm Cold-rolled Steel | 67 | 51.1 | 1350 | 8.1 | 12.8 | 10.6 | 7.4 |
HFE | M6 | 11 | 1 mm Cold-rolled Steel | 67 | 60 | 1400 | 14.4 | 18.1 | 15.5 | 8.2 |
HFE | M8 | 26 | 1 mm Cold-rolled Steel | 65 | 71.1 | 2400 | 33.9 | 32.9 | 27.5 | 10.3 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | PULL THRU (lbs.) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.) |
---|---|---|---|---|---|---|---|---|---|---|
HFE | 032 | 3.6 | .040" Aluminum | 27 | 7500 | 170 | 60 | 2400 | 1900 | .279 |
HFE | 0420 | 8 | .040" Aluminum | 27 | 8000 | 180 | 120 | 3820 | 3200 | .335 |
HFE | 0518 | 19 | .060" Aluminum | 22 | 9000 | 275 | 240 | 6280 | 6000 | .407 |
HFE | 032 | 4.2 | .040" Cold-rolled Steel | 67 | 9500 | 300 | 60 | 2400 | 2200 | .279 |
HFE | 0420 | 9 | .040" Cold-rolled Steel | 67 | 13500 | 340 | 130 | 3820 | 3600 | .335 |
HFE | 0518 | 20 | .060" Cold-rolled Steel | 65 | 15500 | 575 | 290 | 6280 | 6280 | .407 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TENSILE STRENTH (kN) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | ||
---|---|---|---|---|---|---|---|---|---|---|
HF109 | M5 | 10 | 14.8 | 1.2 mm HSLA Steel | 86.1 | 60.1 | 2084 | 9 | ||
HF109 | M6 | 17 | 20.9 | 1.2 mm HSLA Steel | 85.6 | 90 | 2454 | 15.6 | ||
HF109 | M8 | 41 | 38.1 | 1.5 mm HSLA Steel | 84 | 145 | 3026 | 38.4 | ||
HF109 | M5 | 10 | 14.8 | 1 mm Cold-rolled Steel | 45.3 | 43.2 | 978 | 9 | ||
HF109 | M6 | 17 | 20.9 | 1 mm Cold-rolled Steel | 45.5 | 60 | 1072 | 14.4 | ||
HF109 | M8 | 41 | 38.1 | 1.5 mm Cold-rolled Steel | 55 | 85 | 1992 | 37.7 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TENSILE STRENTH (lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (ft. lbs.) | ||
---|---|---|---|---|---|---|---|---|---|---|
HFG8 | 032 | 6.4 | 3000 | .047" HSLA Steel | 85.5 | 14000 | 483 | 6.2 | ||
HFG8 | 0420 | 13 | 4750 | .047" HSLA Steel | 85.7 | 21400 | 592 | 11.5 | ||
HFG8 | 0518 | 28 | 7850 | .060" HSLA Steel | 84.9 | 32600 | 667 | 25.6 | ||
HFG8 | 032 | 6.4 | 3000 | 0.040" Cold-rolled Steel | 45.0 | 9900 | 249 | 5.9 | ||
HFG8 | 0420 | 13 | 4750 | 0.040" Cold-rolled Steel | 45.0 | 14100 | 248 | 11.5 | ||
HFG8 | 0518 | 28 | 7850 | 0.040" Cold-rolled Steel | 55.2 | 19100 | 447 | 25.2 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | ||
---|---|---|---|---|---|---|---|---|---|---|
HFH | M5 | 7.7 | 1.5 mm Aluminum | 15 | 13 | 800 | 5.4 | 12.8 | ||
HFH | M5 | 7.7 | 1.5 mm Steel | 65 | 26 | 1500 | 7.6 | 12.8 | ||
HFHS | M5 | 3.8 | 1.62 mm Aluminum | 35 | 12.4 | 800 | 5.4 | 7.3 | ||
HFHS | M5 | 3.8 | 1.47 mm Steel | 54 | 21.7 | 1500 | 6.4 | 7.3 | ||
HFHB | M5 | 2.7 | 1.5 mm Copper CDA-110 | 28 | 15.6 | 1115 | 3.4 | 5.9 | ||
HFH | M6 | 13 | 1.5 mm Aluminum | 43 | 29 | 1270 | 14 | 18.1 | ||
HFH | M6 | 13 | 1.5 mm Steel | 59 | 33 | 1750 | 14 | 18.1 | ||
HFHS | M6 | 6.5 | 1.62 mm Aluminum | 35 | 15.4 | 1270 | 11 | 10.3 | ||
HFHS | M6 | 6.5 | 1.6 mm Steel | 45 | 24.6 | 1750 | 11 | 10.3 | ||
HFHB | M6 | 4.5 | 1.5 mm Copper CDA-110 | 28 | 25.3 | 1600 | 6.7 | 8.3 | ||
HFH | M8 | 32 | 2.3 mm Aluminum | 39 | 35.6 | 1700 | 30 | 32.9 | ||
HFH | M8 | 32 | 2.3 mm Steel | 58 | 44.5 | 2200 | 30 | 32.9 | ||
HFHS | M8 | 16 | 2.23 mm Aluminum | 44 | 24.4 | 1700 | 20 | 18.8 | ||
HFHS | M8 | 16 | 2.48 mm Steel | 43 | 37.8 | 2100 | 20 | 18.8 | ||
HFHB | M8 | 11 | 3.2 mm Copper CDA-110 | 32 | 33 | 2250 | 15.3 | 15.1 | ||
HFH | M10 | 63 | 2.3 mm Aluminum | 39 | 53.3 | 2445 | 36 | 52.2 | ||
HFH | M10 | 63 | 2.3 mm Steel | 58 | 71.2 | 3470 | 49 | 52.2 | ||
HFHS | M10 | 31 | 2.3 mm Aluminum | 44 | 44.4 | 2445 | 36 | 29.9 | ||
HFHS | M10 | 31 | 2.3 mm Steel | 44 | 57.7 | 3470 | 36 | 29.9 | ||
HFHB | M10 | 22 | 3.2 mm Copper CDA-110 | 32 | 53.3 | 2500 | 25 | 24 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | ||
---|---|---|---|---|---|---|---|---|---|---|
HFH | 032 | 4.6 | .060" Aluminum | 15 | 3000 | 180 | 4 | 2400 | ||
HFH | 032 | 4.6 | .060" Steel | 65 | 6000 | 375 | 5 | 2400 | ||
HFHS | 032 | 2.5 | .050" Aluminum | 38 | 3000 | 180 | 4 | 1500 | ||
HFHS | 032 | 2.5 | .058" Steel | 52 | 4500 | 325 | 4 | 1500 | ||
HFHB | 032 | 1.7 | .061" Copper CDA-110 | 28 | 3400 | 150 | 2.9 | 1200 | ||
HFH | 0420 | 9.6 | .060" Aluminum | 43 | 5500 | 285 | 11 | 3820 | ||
HFH | 0420 | 9.6 | .060" Steel | 59 | 7000 | 480 | 11 | 3820 | ||
HFHS | 0420 | 5.2 | .064" Aluminum | 32 | 4000 | 285 | 8 | 2385 | ||
HFHS | 0420 | 5.2 | .072" Steel | 43 | 6500 | 480 | 8 | 2385 | ||
HFHB | 0420 | 3.6 | .061" Copper CDA-110 | 28 | 6000 | 380 | 5 | 1908 | ||
HFH | 0518 | 20 | .091" Aluminum | 39 | 8000 | 380 | 22 | 6280 | ||
HFH | 0518 | 20 | .090" Steel | 58 | 10000 | 590 | 22 | 6280 | ||
HFHS | 0518 | 11 | .087" Aluminum | 41 | 5500 | 380 | 15 | 3930 | ||
HFHS | 0518 | 11 | .099" Steel | 44 | 7500 | 590 | 15 | 3930 | ||
HFHB | 0518 | 7 | .126" Copper CDA-110 | 32 | 7500 | 500 | 11 | 3140 | ||
HFH | 0616 | 35 | .091" Aluminum | 39 | 12000 | 550 | 25 | 9300 | ||
HFH | 0616 | 35 | .090" Steel | 58 | 16000 | 780 | 36 | 9300 | ||
HFHS | 0616 | 19 | .123" Aluminum | 44 | 10000 | 560 | 25 | 5810 | ||
HFHS | 0616 | 19 | .099" Steel | 44 | 13000 | 780 | 25 | 5810 | ||
HFHB | 0616 | 13 | .126" Copper CDA-110 | 32 | 12000 | 560 | 18 | 4650 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL-THRU (kN) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS |
---|---|---|---|---|---|---|---|---|---|---|
HFLH | M5 | 6.4 | 1 mm HC500LA | 89 | 51.1 | 1350 | 8.1 | 12.8 | 10.6 | 7.4 |
HFLH | M6 | 11 | 1 mm HC500LA | 89 | 60 | 1400 | 14.4 | 18.1 | 15.5 | 8.2 |
HFLH | M8 | 26 | 1.5 mm HC500LA | 91 | 71.1 | 2400 | 33.9 | 32.9 | 27.5 | 10.3 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | PULL-THRU (lbs.) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS |
---|---|---|---|---|---|---|---|---|---|---|
HFLH | 032 | 4.2 | .040" HC500LA | 89 | 9500 | 300 | 60 | 2400 | 2200 | 0.279 |
HFLH | 0420 | 10 | .040" HC500LA | 89 | 13500 | 340 | 130 | 3820 | 3600 | 0.335 |
HFLH | 0518 | 23 | .060" HC500LA | 91 | 16000 | 575 | 290 | 6280 | 6280 | 0.407 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL-THRU (N) | |||
---|---|---|---|---|---|---|---|---|---|---|
SGPC | M2.5 | 0.67 | Single Sheet of 1 mm 300 Series Stainless Steel | 20.1 | 2546 | 0.86 | 2561 | |||
SGPC | M3 | 0.9 | Single Sheet of 1 mm 300 Series Stainless Steel | 21.8 | 2051 | 1.35 | 2851 | |||
SGPC | M4 | 2.5 | Single Sheet of 1 mm 300 Series Stainless Steel | 28.5 | 2396 | 2.66 | 4000 | |||
SGPC | M5 | 3.3 | Single Sheet of 1 mm 300 Series Stainless Steel | 35.6 | 3200 | 5.96 | 4284 | |||
SGPC | M6 | 3.3 | Single Sheet of 1 mm 300 Series Stainless Steel | 42.3 | 3262 | 9.19 | 6311 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL-THRU (lbs.) | |||
---|---|---|---|---|---|---|---|---|---|---|
SGPC | 256 | 3.7 | Single Sheet of .039" 300 Series Stainless Steel | 4000 | 425 | 5.2 | 415 | |||
SGPC | 440 | 6 | Single Sheet of .039" 300 Series Stainless Steel | 5000 | 450 | 8 | 512 | |||
SGPC | 632 | 12 | Single Sheet of .039" 300 Series Stainless Steel | 5500 | 460 | 15.8 | 811 | |||
SGPC | 832 | 20 | Single Sheet of .039" 300 Series Stainless Steel | 6500 | 480 | 29.3 | 1133 | |||
SGPC | 032 | 25 | Single Sheet of .039" 300 Series Stainless Steel | 7300 | 545 | 42.8 | 1273 | |||
SGPC | 0420 | 45 | Single Sheet of .039" 300 Series Stainless Steel | 10000 | 565 | 76.7 | 1721 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) | PULL THRU TEST BUSHING HOLE SIZE (mm) |
---|---|---|---|---|---|---|---|---|---|
TFH | M3 | 1.1 | 0.65 mm Aluminum | 42 | 5.8 | 370 | 0.72 | 3091 | 3.51 |
TFHS | M3 | 0.93 | 0.65 mm Aluminum | 43 | 5.8 | 255 | 0.19 | 2962 | 3.51 |
TFH | M4 | 1.9 | 0.65 mm Aluminum | 42 | 14.2 | 396 | 1.29 | 3963 | 4.5 |
TFHS | M4 | 1.7 | 0.65 mm Aluminum | 40 | 9.8 | 391 | 1.83 | 4126 | 4.5 |
TFH | M5 | 2.8 | 0.64 mm Aluminum | 42 | 3.2 | 499 | 1.71 | 4720 | 5.51 |
TFHS | M5 | 2.6 | 0.64 mm Aluminum | 42 | 3.2 | 518 | 2.29 | 4977 | 5.51 |
TFH | M3 | 1.3 | 0.57 mm Steel | 57 | 8 | 419 | 1.32 | 3477 | 3.51 |
TFHS | M3 | 0.94 | 0.57 mm Steel | 57 | 6.7 | 394 | 0.84 | 2971 | 3.51 |
TFH | M4 | 2.1 | 0.57 mm Steel | 57 | 17.8 | 453 | 1.69 | 4380 | 4.5 |
TFHS | M4 | 2 | 0.57 mm Steel | 57 | 13.4 | 460 | 2.49 | 4701 | 4.5 |
TFH | M5 | 3.4 | 0.56 mm Steel | 57 | 12.1 | 570 | 2.77 | 5654 | 5.51 |
TFHS | M5 | 2.8 | 0.57 mm Steel | 57 | 12.9 | 582 | 2.9 | 5328 | 5.51 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) | PULL THRU TEST BUSHING HOLE SIZE (in.) |
---|---|---|---|---|---|---|---|---|---|
TFH | 440 | 9.2 | .025" Aluminum | 38 | 1300 | 75 | 10 | 683 | .132 |
TFHS | 440 | 6.2 | .025" Aluminum | 38 | 1200 | 75 | 8 | 527 | .132 |
TFH | 632 | 13 | .025" Aluminum | 41 | 2400 | 87 | 9 | 791 | .158 |
TFHS | 632 | 11 | .025" Aluminum | 41 | 2400 | 88 | 12 | 748 | .158 |
TFH | 832 | 19 | .025" Aluminum | 41 | 2100 | 94 | 14 | 943 | .184 |
TFHS | 832 | 17 | .025" Aluminum | 41 | 2200 | 94 | 17 | 963 | .184 |
TFH | 024/032 | 24 | .025" Aluminum | 38 | 2300 | 98 | 13 | 1033 | .210 |
TFHS | 024/032 | 21 | .025" Aluminum | 38 | 2500 | 101 | 12 | 1040 | .210 |
TFH | 440 | 9.2 | .022" Steel | 57 | 2800 | 85 | 10 | 684 | .132 |
TFHS | 440 | 6.2 | .022" Steel | 57 | 1500 | 80 | 9 | 531 | .132 |
TFH | 632 | 15 | .022" Steel | 57 | 2800 | 97 | 14 | 906 | .158 |
TFHS | 632 | 11 | .022" Steel | 57 | 2800 | 100 | 16 | 750 | .158 |
TFH | 832 | 21 | .022" Steel | 57 | 3500 | 111 | 23 | 1065 | .184 |
TFHS | 832 | 19 | .022" Steel | 57 | 2700 | 113 | 26 | 1109 | .184 |
TFH | 024/032 | 28 | .022" Steel | 57 | 3900 | 121 | 25 | 1214 | .210 |
TFHS | 024/032 | 24 | .022" Steel | 57 | 3200 | 112 | 23 | 1184 | .210 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL THRU (kN) | PULL THRU TEST BUSHING HOLE SIZE (mm) |
---|---|---|---|---|---|---|---|---|---|---|
THFE | M6 | 9 | 0.8 mm Aluminum | 38 | 39.2 | 550 | 7.3 | 18.1 | 13 | 8.3 |
THFE | M8 | 27 | 0.8 mm Aluminum | 44 | 56 | 582 | 12.2 | 32.9 | 27.8 | 10.3 |
THFE | M6 | 10 | 0.8 mm Cold-rolled Steel | 47 | 60.1 | 886 | 13.4 | 18.1 | 14.3 | 8.3 |
THFE | M8 | 27 | 0.8 mm Cold-rolled Steel | 47 | 71.2 | 881 | 13.1 | 32.9 | 28.1 | 10.3 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | PULL THRU (lbs.) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.) |
---|---|---|---|---|---|---|---|---|---|---|
THFE | 0420 | 8.1 | .031" Aluminum | 35 | 8800 | 116 | 71 | 3820 | 3249 | .340 |
THFE | 0518 | 18 | .031" Aluminum | 44 | 11700 | 131 | 103 | 6280 | 5701 | 0.402 |
THFE | 0420 | 8.5 | .031" Cold-rolled Steel | 47 | 13500 | 197 | 116 | 3820 | 3388 | .340 |
THFE | 0518 | 18 | .031" Cold-rolled Steel | 47 | 16000 | 187 | 124 | 6280 | 5772 | .402 |
TYPE | PIN DIA. CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | ||||||
---|---|---|---|---|---|---|---|---|---|---|
TP4 | 3MM | 300 Series Stainless Steel | 35 | 1556 | ||||||
TP4 | 4MM | 300 Series Stainless Steel | 45 | 2335 | ||||||
TP4 | 5MM | 300 Series Stainless Steel | 54 | 2535 | ||||||
TP4 | 6MM | 300 Series Stainless Steel | 60 | 2891 |
TYPE | PIN DIA. CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | ||||||
---|---|---|---|---|---|---|---|---|---|---|
TP4 | 125 | 300 Series Stainless Steel | 8000 | 350 | ||||||
TP4 | 187 | 300 Series Stainless Steel | 12000 | 570 | ||||||
TP4 | 250 | 300 Series Stainless Steel | 14000 | 650 |
TYPE | PIN DIA. CODE | TEST SHEET MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (kN) | |||||
---|---|---|---|---|---|---|---|---|---|---|
TPS | 3MM | Aluminum | 22 | 12 | 0.56 | |||||
TPS | 3MM | Steel | 65 | 22 | 0.98 | |||||
TPS | 4MM | Aluminum | 19 | 22 | 0.89 | |||||
TPS | 4MM | Steel | 66 | 26.4 | 1.54 | |||||
TPS | 5MM | Aluminum | 18 | 28.6 | 1.01 | |||||
TPS | 5MM | Steel | 60 | 35.2 | 1.76 | |||||
TPS | 6MM | Aluminum | 18 | 30.8 | 1.1 | |||||
TPS | 6MM | Steel | 62 | 39.6 | 2.1 |
TYPE | PIN DIA. CODE | TEST SHEET MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | |||||
---|---|---|---|---|---|---|---|---|---|---|
TPS | 125 | Aluminum | 20 | 4500 | 150 | |||||
TPS | 125 | Steel | 62 | 6500 | 250 | |||||
TPS | 187 | Aluminum | 18 | 6500 | 230 | |||||
TPS | 187 | Steel | 60 | 8000 | 400 | |||||
TPS | 250 | Aluminum | 18 | 7000 | 270 | |||||
TPS | 250 | Steel | 62 | 9000 | 500 |
TYPE | PIN DIA. CODE | TEST SHEET MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (kN) | |||||
---|---|---|---|---|---|---|---|---|---|---|
TPXS | 3MM | Aluminum | 22 | 12 | 0.56 | |||||
TPXS | 3MM | Steel | 65 | 22 | 0.98 |
Inventory
Distributor | Quantity | Contact | Phone | Address | Locations |
---|