HFLH-M5-30ZI

Type HFLH™ Hard Panel Studs

HFLH-M5-30ZI

Type HFLH™ Hard Panel Studs

  • Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
  • Allows overall weight reduction for all vehicles
  • Provides lower installed cost

Compare to other thin sheet fastening devices:– Addresses environmental concerns

  • Lighter weight
  • Close to edge of panel mounting
  • No embossing required
  • Hardened stud material provides stronger thread strength
  • Can be installed automatically using press or in-die technology

Specifications

Thread Code
M5
Thread Size
M5 x 0.8
Thread Size X Pitch
M5 x 0.8
Thread Specification
2A / ASME B1.13M, 6g, ASME B1.1, External
Fastener Material
Alloy Steel, Heat-Treated Alloy Steel
Standard Finish
colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633, Zinc plus Clear Chromate
For Use in Sheet Hardness
HRB 96 / HB 216 or Less
Length Code
30
Tensile strength_MPa
900
Product Category
Type HFLH™ Hard Panel Studs
CAD Supplier
PennEngineering® (PEM®)
CADPartID
110706
Application Type
Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
Base Panel Material
Hard Steel
Brand
PEM
Fastener Characteristics
Threaded External
Industry
Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed, In-Die
PEM Product Family
FH
Product Type
Studs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Metric
H Plus Minus 025 Mm
9.6mm
Hole Size in Sheet + 0.13_mm
5mm
L Len Pm 015in Or 4mm
30mm
Max. Hole in Attached Parts_mm
7.3mm
Min. Dist. Hole C/L to Edge_mm
10mm
Min. Sheet Thickness_mm
1mm
S Max._mm
2.6mm
T Max._mm
1.35mm

Resources

Installation & Performance Data

fh-hflh-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) TENSILE STRENGTH (kN) PULL-THRU (kN) TEST BUSHING HOLE SIZE FOR PULL THRU TESTS
HFLH M5 6.4 1 mm HC500LA 89 51.1 1350 8.1 12.8 10.6 7.4

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”