IFH-M2.5-12
Ingress Capable Flush-Head Studs – Types IFH, IFHA, IFHS, IFHP
IFH-M2.5-12
Ingress Capable Flush-Head Studs – Types IFH, IFHA, IFHS, IFHP
IFH™ self clinching studs allow for maximum material flow into the stud undercut to create a water-tight seal. Tighter tolerances and process controls produce a consistent reliable ingress capable result every time.
- Meets ISO:20653-2014 ingress protection levels
- Ingress repellent capability, meeting IPX7 and IPX9K IP ratings
- No rubber gasket or sealants needed
- Testing completed in CR4 steel, 6082-T6 aluminum, and 304 stainless steel
Specifications
- Thread Code
- M2.5
- Thread Size
- M2.5 x 0.45
- Fastener Material
- Steel
- Material Code
- IFH
- Standard Finish
- Colorless, Type III, Zinc plated per Zinc plated per (5µm)
- For Use in Sheet Hardness
- HRB 80/HB 150 or Less
- Length Code
- 12
- Product Category
- Ingress Capable Flush-Head Studs – Types IFH, IFHA, IFHS, IFHP
- CAD Supplier
- PennEngineering® (PEM®)
- CAD URL 3D
- https://catalog.pemnet.com/cadviewer/ThreeDim?sn=ifh-m2-5-12-1&plpVer=1039
- H 0.4_mm
- 4.1mm
- Hole Size in Sheet +0.08_mm
- 2.5mm
- Length L_mm
- 12mm
- Max. Hole in Attached Parts_mm
- 2.5mm
- Min. Dist. Hole C/L to Edge_mm
- 5.4mm
- Min. Sheet Thickness_mm
- 1.5mm
- S Max._mm
- 1.95mm
Installation & Performance Data
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
|---|---|---|---|---|---|---|---|---|
| IFH | M2.5 | 0.78 | 1.6 mm Aluminum | 29 | 8.9 | 465 | 1 | 2600 |
| IFH | M2.5 | 0.84 | 1.5 mm Steel | 59 | 11.1 | 740 | 1 | 2800 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|