SS-RT032-1ZI

All Metal, RT® Free-Running Locknuts

SS-RT032-1ZI

All Metal, RT® Free-Running Locknuts

PEM® S-RT™ free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.

  • Screw turns freely until a clamp load is applied.
  • Resistant to vibrational loosening.
  • Back side of panel is flush or sub-flush for screw installation.
  • Locking feature reusability is not affected by number of on/off cycles.
  • Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin CL.

Specifications

Thread Code
RT032
Thread Size
.190-32 (#10-32), #10-32
Thread Specification
Modified thread form on loaded flank. Will accept a maximum material 6g screw.
Shank Code
1
Fastener Material
Carbon Steel, Hardened Carbon Steel
Standard Finish
colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633, Zinc plus Clear Chromate
For Use in Sheet Hardness
HRB 80 / HB 150 or less
Product Category
All Metal, RT® Free-Running Locknuts
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103686
Application Type
Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Consumer Electronics, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Locking, Threaded Internal
Industry
Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical
PEM Product Family
CL, LN
Product Type
Nuts
Technology Type
Self-Clinching
Unit (Metric/Unified)
Unified
A Shank Max
0.038in
E ± .010_in
.340in
Hole Size in Sheet + .003 – .000_in
.250in
Min. Dist. Hole C/L to Edge_in
.28in
C Max._in
.249in
Rec. Min. Sheet Thickness_in
.040in
T ± .010_in
.090in

Resources

Installation & Performance Data

cl-s-ss-nuts-unified
TYPE THREAD CODE SHANK CODE TEST SHEET MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
SS RT032 0 5052-H34 Aluminum 2500-3000 68 26
SS RT032 1 5052-H34 Aluminum 2500-3000 110 32
SS RT032 2 5052-H34 Aluminum 2500-3000 190 50
SS RT032 0 Cold-Rolled Steel 4000-9000 120 32
SS RT032 1 Cold-Rolled Steel 4000-9000 180 40
SS RT032 2 Cold-Rolled Steel 4000-9000 320 60
ln-s-nuts-unified
TYPE THREAD CODE SHANK CODE TEST SHEET MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
SS RT032 0 5052-H34 Aluminum 2500-3500 68 26
SS RT032 1 5052-H34 Aluminum 2500-3500 110 32
SS RT032 2 5052-H34 Aluminum 2500-3500 190 50
SS RT032 0 Cold-Rolled Steel 4000-9000 120 32
SS RT032 1 Cold-Rolled Steel 4000-9000 180 40
SS RT032 2 Cold-Rolled Steel 4000-9000 320 60

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”