WN-M5-0CU

Self-Locating Projection Weld Nuts – Type WN, WNS

WN-M5-0CU

Self-Locating Projection Weld Nuts – Type WN, WNS

PEM® weld nuts (Types WN/WNS) provide load-bearing threads in metal sheets too thin to tap, and permit faster assembly.

PEM brand weld nuts overcome many problems associated with other weld nuts – burn-outs, complicated electrodes and pilots, tedious time-consuming indexing and re-tapping to remove weld spatter. Their design, based on the experience of hundreds of users of weld nuts, speeds production using standard equipment, thereby reducing labor costs.

PEM stainless steel weld nuts offer the added advantage of resisting corrosion. You may specify steel or stainless steel for your requirements and be sure you are getting the weld nuts that are easiest to install. A variety of welding equipment is suitable for installation of PEM weld nuts. Best results have been obtained with a 50KVA press-type, spot-welding machine whose upper welding head moves vertically in a straight line with the lower electrode. Flat-faced electrodes with tip diameters .125” / 3.2 mm larger than the “E” dimension of the PEM weld nut should be used.

Specifications

Thread Code
M5
Thread Size
M5 x 0.8
Thread Size X Pitch
M5 x 0.8
Thread Specification
6H per ASME B1.13M
Fastener Material
Carbon Steel
Standard Material
Carbon Steel
Standard Finish
Copper Electroplate, Copper Flash
Product Category
Self-Locating Projection Weld Nuts – Type WN, WNS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103788
Thread Type
WN
Base Panel Material
Hard Steel, Stainless Steel, Steel
Brand
PEM
Fastener Characteristics
Threaded Internal
Installation Equipment/Method
Other
PEM Product Family
WN
Product Type
Nuts
Technology Type
Welding
Unit (Metric/Unified)
Metric
A Shank Max
0.77mm
E – 0.25_mm
11.18mm
Hole Size In Sheet + 0.1_mm
6.35mm
Min. Dist. Hole C/L to Edge_mm
5.59mm
Min. Sheet Thickness_mm
0.77mm
C Max._mm
6.32mm
T ± 0.1_mm
3.77mm

Installation & Performance Data

wn-wns-metric
TYPE THREAD CODE TEST SHEET THICKNESS (mm) TEST SHEET MATERIAL PUSHOUT (N) TORQUE-OUT (N•m)
WN M5 1.5 Cold-Rolled Steel 3910 6.3
WN M5 1.5 302 Stainless Steel N/A N/A

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”