AC-M5-1

Floating Self-Clinching Fasteners A4, AS, AC

AC-M5-1

Floating Self-Clinching Fasteners A4, AS, AC

Locking and Non-locking Threads These fasteners provide load-bearing threads in thin sheets and permit up to 0.76mm adjustment for mating hole misalignment.

The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place.

Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque performance is equivalent to applicable NASM25027 specifications.

Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets as thin as 0.97mm with hardness up to HRB 88 on the Rockwell “B” scale.

Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).

仕様

Thread Code.jp
M5
ねじ径
M5 x 0.8
ねじ径 x ピッチ
M5 x 0.8
ねじの仕様
6H, ANSI/ASME B1.13M, 内部
Shank Code
1
ファスナー材質
300シリーズステンレススチール
Fastener Materials – Nut
300 Series Stainless Steel
Fastener Materials – Retainer
300 Series Stainless Steel
Standard Finish – Retainer & Nut
Passivated and/or tested per ASTM A380
For Use in Sheet Hardness
HRB 70 / HB 125 or Less
Float
0.38mm minimum, in all directions from center, 0.76mm total
Product Category
Floating Self-Clinching Fasteners A4, AS, AC
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103681
Thread Type
Non-Locking
ブランド
PEM
ファスナーの特徴
フローティング
PEM®製品
ALA
製品
ナット
技術
セルフクリンチ
ユニット
メートル法
A Shank Max
0.97mm
E ± 0.38_mm
11.94mm
Hole Size in Sheet + 0.08_mm
10.31mm
Min. Dist. Hole C/L to Edge_mm
9.14mm
Min. Sheet Thickness_mm
0.97mm
C Max._mm
10.29mm
D Max._mm
10.29mm
T1 Max._mm
4.32mm

リソース

データシート

ala-ac-as-las-lac-metric
TYPE THREAD CODE SHANK CODE TEST SHEET MATERIAL INSTALLATION (kN) RETAINER PUSHOUT (N) RETAINER TORQUE-OUT (N•m)
AC, AS, LAS, LAC M5 1 5052-H34 Aluminum 8.9 1134 16.9
AC, AS, LAS, LAC M5 2 5052-H34 Aluminum 8.9 1556 19.7
AC, AS, LAS, LAC M5 1 Cold-Rolled Steel 15.6 1779 16.9
AC, AS, LAS, LAC M5 2 Cold-Rolled Steel 15.6 2001 22.6

在庫

販売業者 在庫 お問い合わせ 電話番号 住所 ロケーション

探索

何かをお探しですか?

私たちのウェブサイトは様々な方法で検索が可能です。部品番号または部品番号の一部を使用して、在庫や製品の仕様を検索いただけます。「在庫」や「製品仕様」などの単語を入力する必要はありません。
入力例:
部品番号の全体または一部を使った検索:「S-632-1ZI」、「CLS 632」 型式による検索:「CLS」、「FH」、「SO」 サイトコンテンツの検索:「セルフクリンチングナット」、「PEMスタッド」