FHL-M3-10ZI

Low-Displacement Head Studs – Types FHL, FHLS

FHL-M3-10ZI

Low-Displacement Head Studs – Types FHL, FHLS

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FHL (flush low-displacement head) Studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.- Installs closer to the edge of a sheet than PEM Type FH/FHS studs without causing that edge to bulge.

  • Flush-head for sheet thickness 1.00 mm and greater.
  • Type FHL is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
  • Type FHLS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.

Specifications

Thread Code
M3
Thread Size
M3 x 0.5
Thread Size X Pitch
M3 x 0.5
Thread Specification
6g, ASME B1.13M, External
Fastener Material
Carbon Steel, Heat-Treated Carbon Steel
Standard Finish
colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633, Zinc plus Clear Chromate
For Use in Sheet Hardness
HRB 80 / HB 150 or less
Length Code
10
Product Category
Low-Displacement Head Studs – Types FHL, FHLS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103709
Application Type
Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Close To Edge, Threaded External
Industry
Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed, In-Die
PEM Product Family
FH
Product Type
Studs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Metric
H ± 0.4_mm
3.65mm
Hole Size in Sheet + 0.08_mm
3mm
L Len Pm 015in Or 4mm
10mm
Max. Hole in Attached Parts_mm
3.40mm
Min. Dist. Hole C/L to Edge_mm
3.3mm
Min. Sheet Thickness_mm
1mm
S Max._mm
2.10mm

Resources

Installation & Performance Data

fh-fhl-fhls-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL THRU (N) PULL THRU TEST BUSHING HOLE SIZE (mm)
FHL, FHLS M3 0.41 1.2 mm Aluminum 33 4.4 285 0.65 1300 3.5
FHL, FHLS M3 0.79 1.1 mm Steel 54 5.3 475 1.25 2500 3.5

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”