HFE-M6-50ZC

High-Strength Studs for Thin Sheets – Type HFE

HFE-M6-50ZC

High-Strength Studs for Thin Sheets – Type HFE

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

HFE (heavy-duty) Studs are designed with an enlarged head diameter which projects above the sheet material and provides maximum pull through in sheets as thin as 1.00 mm.- Enlarged head diameter provides high-strength in sheets as thin as 1.00 mm.

  • Recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 85 or less and HB (Hardness Brinell) 165 or less.

Specifications

Thread Code
M6
Thread Size
M6 x 1
Thread Specification
6g, ASME B1.13M, External
Fastener Material
Carbon Steel
Optional Finish
SC1 (5µm), Type II, yellow, Zinc plated per ASTM B633
For Use in Sheet Hardness
HRB 85 / HB 165 or Less
Length Code
50
Thread Strength_MPa
900
Product Category
High-Strength Studs for Thin Sheets – Type HFE
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103711
Application Type
Aerospace, Automotive, Commercial Vehicles, Industrial, Manufacturing & Sheet Metal Fabrication
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Threaded External
Industry
Automotive, Datacom & Telecom, Defense, Electric Vehicles, Industrial & Commercial
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed, In-Die
PEM Product Family
FH
Product Type
Studs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Metric
H Plus Minus 025 Mm
11.35mm
Hole Size in Sheet + 0.13_mm
6mm
L Len Pm 015in Or 4mm
50mm
Max. Hole in Attached Parts_mm
8.3mm
Min. Dist. Hole C/L to Edge_mm
11.5mm
Min. Sheet Thickness_mm
1mm
S Max._mm
2.8mm
T Max._mm
1.52mm

Resources

Installation & Performance Data

fh-hfe-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) TENSILE STRENGTH (kN) PULL THRU (N) PULL THRU TEST BUSHING HOLE SIZE (mm)
HFE M6 10 1 mm Aluminum 27 39 750 11.8 18.1 14.2 8.2
HFE M6 11 1 mm Cold-rolled Steel 67 60 1400 14.4 18.1 15.5 8.2

Inventory

Distributor Quantity Contact Phone Address Locations

Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”