HFHB-M5-50X

High-Strength Studs – Type HFH/HFHS/HFHB

HFHB-M5-50X

High-Strength Studs – Type HFH/HFHS/HFHB

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows s

Specifications

Thread Code
M5
Thread Size
M5 x 0.8
Thread Specification
6g, ASME B1.13M, External
Fastener Material
Phosphor Bronze
Material Code
B
Standard Finish
No Finish
For Use in Sheet Hardness
HRB 55 / HB 83 or Less
Length Code
50
Thread Strength_MPa
415
Product Category
High-Strength Studs – Type HFH/HFHS/HFHB
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103715
Application Type
Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Medical, Telecom
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Threaded External
Industry
Automotive, Automotive Electronics, Datacom & Telecom, Defense, Electric Vehicles, Industrial & Commercial, Medical
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed, In-Die
PEM Product Family
FH
Product Type
Studs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Metric
H Plus Minus 025 Mm
7.8mm
Hole Size in Sheet + 0.13_mm
5mm
L Len Pm 015in Or 4mm
50mm
Max. Hole in Attached Parts_mm
6.5mm
Min. Dist. Hole C/L to Edge_mm
10.7mm
Min. Sheet Thickness_mm
1.3mm
S Max._mm
2.7mm
T Max._mm
1.14mm

Resources

Installation & Performance Data

fh-hfh-hfhs-hfhb-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) TENSILE STRENGTH (kN)
HFHB M5 2.7 1.5 mm Copper CDA-110 28 15.6 1115 3.4 5.9

Inventory

Distributor Quantity Contact Phone Address Locations

Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”