LAS-440-2MD

Floating self-clinching, locking thread fasteners LA4, LAC, LAS

LAS-440-2MD

Floating self-clinching, locking thread fasteners LA4, LAC, LAS

Locking and Non-locking Threads These fasteners provide load-bearing threads in thin sheets and permit up to .030” adjustment for mating hole misalignment.

The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place.

Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque performance is equivalent to applicable NASM25027 specifications.

Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets as thin as .038” with hardness up to HRB 88 on the Rockwell “B” scale.

Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).

Specifications

Thread Code
440
Thread Size
.112-40 (#4-40), #4-40
Thread Specification
2B, ANSI B1.1, Internal
Shank Code
2
Fastener Material
Carbon Steel, Steel
Fastener Materials – Nut
300 Series Stainless Steel
Fastener Materials – Retainer
Heat-Treated Carbon Steel
Nut Finish
Black Dry-film Lubricant
Retainer Finish
Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
For Use in Sheet Hardness
HRB 70 / HB 125 or Less
Float
.015” minimum, in all directions from center, .030” total
Product Category
Floating self-clinching, locking thread fasteners LA4, LAC, LAS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103680
Thread Type
Self-Locking
Application Type
Industrial, Manufacturing & Sheet Metal Fabrication
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Floating, Locking, Threaded Internal
Industry
Industrial & Commercial
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed
PEM Product Family
ALA, LN
Product Type
Nuts
Technology Type
Self-Clinching
Unit (Metric/Unified)
Unified
A Shank Max
.054in, 0.054in
E ± .015_in
.360in
Hole Size in Sheet + .003 – .000_in
.290in
Min. Dist. Hole C/L to Edge_in
.300in
Min. Sheet Thickness_in
.054in
C Max._in
.289in
D Max._in
.290in
T1 Max._in
.130in
T2 Max._in
.190in

Resources

Installation & Performance Data

ala-ac-as-las-lac-unified
TYPE THREAD CODE SHANK CODE TEST SHEET MATERIAL INSTALLATION (lbs.) RETAINER PUSHOUT (lbs.) RETAINER TORQUE-OUT (in. lbs.)
AC, AS, LAS, LAC 440 1 5052-H34 Aluminum 1500 215 65
AC, AS, LAS, LAC 440 2 5052-H34 Aluminum 2000 225 80
AC, AS, LAS, LAC 440 1 Cold-Rolled Steel 3000 300 85
AC, AS, LAS, LAC 440 2 Cold-Rolled Steel 3000 300 150
ln-las-lac-nuts-unified
TYPE THREAD CODE SHANK CODE TEST SHEET MATERIAL INSTALLATION (lbs.) RETAINER PUSHOUT (lbs.) RETAINER TORQUE-OUT (in. lbs.)
LAS, LAC 440 1 2024-T3 Aluminum 3000 220 65
LAS, LAC 440 2 2024-T3 Aluminum 3000 225 150
LAS, LAC 440 1 5052-H34 Aluminum 1500 215 65
LAS, LAC 440 2 5052-H34 Aluminum 2000 225 80
LAS, LAC 440 1 Cold-Rolled Steel 3000 300 85
LAS, LAC 440 2 Cold-Rolled Steel 3000 300 150

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”