PFTRCS-5.0-1.0

Self-Clinching Roller Bearing Fasteners – PFTRCS

PFTRCS-5.0-1.0

Self-Clinching Roller Bearing Fasteners – PFTRCS

PEM® PFTRCS™ and PFTRFS™ roller bearing fasteners are permanently mounted in sheets as thin as .040” / 1 mm.

  • Support loads while guiding and positioning components
  • Create friction free assemblies
  • Eliminate oil lubricants typically used in drawer slides
  • Eliminate loose hardware needed to assemble drawer slides

PEM® PFTRCS™ self-clinching roller bearing fasteners are easily installed into prepunched or drilled holes and PFTRFS™ flaring roller bearing fasteners are easily installed with self-piercing installation tooling to pierce hole and install fastener in one step.

Specifications

Material Retainer
Hardened Steel
Finish Retainer
Bright Nickel over Copper Flash per ASTM B689
For Use in Sheet Hardness
For Use in Sheet Hardness HRB 80 / HB 150 or less
Product Category
Self-Clinching Roller Bearing Fasteners – PFTRC
CAD Supplier
PennEngineering® (PEM®)
CADPartID
126285
Thread Type
PFTRC
A (Shank) Nom._in
.038in
A (Shank) Nom._mm
0.97mm
E ±.004″/±0.1mm_in
.197in
E ±.004″/±0.1mm_mm
5mm
Fastener Diameter Code
5.0
Finish Roller Bearing
Passivated and/or tested per ASTM A380
Hole Size in Sheet +.003″/+0.08mm_in
.130in
Hole Size in Sheet +.003″/+0.08mm_mm
3.3mm
Material Roller Bearing
300 Series Stainless Steel
Min. Sheet Thickness Code
1.0
PEM Product Family
PFTR
Product Type
Panel Fasteners
D Nom._in
.154in
D Nom._mm
3.9mm
Min. Dist. Hole C/L to Edge_in
.177in
Min. Dist. Hole C/L to Edge_mm
4.5mm
Min. Sheet Thickness_in
.040in
Min. Sheet Thickness_mm
1.0mm
C Max._in
.129in
C Max._mm
3.28mm
T Nom._in
.177in
T Nom._mm
4.5mm

Installation & Performance Data

PFTRC-metric
Type Fastener Dia. Code – Sheet Code Test Sheet Material Installation (kN) Pushout (N) Side-Load (N)
PRTRC PFTRC-5.0-1.0 1mm Cold-Rolled Steel 6.3 536 237
PRTRC PFTRC-9.0-1.0 1mm Cold-Rolled Steel 10.3 672 519
PFTRC-unified
Type Fastener Dia. Code – Sheet Code Test Sheet Material Installation (lbs.) Pushout (lbs.) Side-Load (lbs.)
PRTRC PFTRC-5.0-1.0 .039" Cold-Rolled Steel 1416 120 53
PRTRC PFTRC-9.0-1.0 .039" Cold-Rolled Steel 2316 151 117
PFTRF-metric
Type Fastener Dia. Code – Sheet Code Test Sheet Material Installation (kN) Pushout (N) Side-Load (N)
PRTRF PFTRF-5.0-1.0 1mm Cold-Rolled Steel HRB 65 24.5 1280 440
PFTRF PFTRF-9.0-1.0 1mm Cold-Rolled Steel HRB 65 28.9 1820 760
PRTRF PFTRF-5.0-1.0 1.2mm Cold-Rolled Steel HRB 60 24.5 1570 550
PFTRF PFTRF-9.0-1.0 1.2mm Cold-Rolled Steel HRB 60 28.9 2130 890

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”