SMTSO-143-12ET

ReelFast® Surface Mount Nuts and Spacers/Standoffs –
Type SMTSO

SMTSO-143-12ET

ReelFast® Surface Mount Nuts and Spacers/Standoffs –
Type SMTSO

Type SMTSO – ReelFast® surface mount nuts and standoffs are available threaded and unthreaded.

Packaged on 330 mm recyclable reels. Tape width is 24 mm. Supplied with polyimide patch for vacuum pick up. Reels conform to EIA-481.

Specifications

Fastener Material
Carbon Steel
Standard Finish
Tin Electroplate
For Use in Sheet Hardness
Not Applicable
Length Code
12
Parts per Reel
300
Product Category
ReelFast® Surface Mount Nuts and Spacers/Standoffs –
Type SMTSO
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103783
Application Type
Automotive Electronics, Datacom, Telecom
Base Panel Material
PC Board
Brand
PEM
Fastener Characteristics
Threaded Internal
Industry
Automotive Electronics, Datacom & Telecom
Installation Equipment/Method
Surface Mount
L Len Pm 005in Or 13mm
0.375in
PEM Product Family
K, MPF
Product Type
Nuts, Standoffs
Technology Type
Surface Mounted
Unit (Metric/Unified)
Unified
A Max._in
0.06in
E ± .005_in
0.281in
Min. Sheet Thickness_in
0.06in
C Max._in
0.208in
øD – Min. Solder Pad_in
0.306in
øH – Hole Size in Sheet + .003 – .000_in
0.213in
Pitch_mm
16mm
Thru-Hole + .004-.003_in
0.143in
Thru-Hole Code
143

Resources

Installation & Performance Data

k-kf2-kfs2-kfe-kfse-kfb3-kfh-pfk-fasteners-metric
TYPE THREAD CODE MAX. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
KF2, KFS2, KFE, KFSE M2 N/A 1.5 mm FR-4 Panel 2.2 267 0.68
KF2, KFS2, KFE, KFSE M3 N/A 1.5 mm FR-4 Panel 2.2 290 1.7
KF2, KFS2, KFE, KFSE M4 N/A 1.5 mm FR-4 Panel 2.2 420 3.4
KF2, KFS2, KFE, KFSE M5 N/A 1.5 mm FR-4 Panel 2.9 440 4.5
KFB3 M3 N/A 1.5 mm FR-4 Panel 4.4 560 2.03
KFB3 M4 N/A 1.5 mm FR-4 Panel 6 680 3.2
KFH M3 0.45 1.5 mm FR-4 Panel 1.8 285 0.79
KFH M4 1.6 1.5 mm FR-4 Panel 1.8 355 1.8
KFH M5 2.1 1.5 mm FR-4 Panel 1.8 400 1.92
PFK M3 (3) 1.5 mm FR-4 Panel 1.1 245 N/A
k-kf2-kfs2-kfe-kfse-kfb3-kfh-pfk-fasteners-unified
TYPE THREAD CODE MAX. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
KF2, KFS2, KFE, KFSE 256 N/A .060" FR-4 Panel 400 60 6
KF2, KFS2, KFE, KFSE 440 N/A .060" FR-4 Panel 400 65 15
KF2, KFS2, KFE, KFSE 632 N/A .060" FR-4 Panel 500 80 30
KF2, KFS2, KFE, KFSE 832 N/A .060" FR-4 Panel 700 95 35
KF2, KFS2, KFE, KFSE 032 N/A .060" FR-4 Panel 700 100 40
KFB3 440 N/A .060" FR-4 Panel 1000 140 18
KFB3 632 N/A .060" FR-4 Panel 1500 170 28
KFH 440 4 .060" FR-4 Panel 400 65 7
KFH 632 8 .060" FR-4 Panel 400 70 11
KFH 832 15 .060" FR-4 Panel 400 80 16
KFH 032 18 .060" FR-4 Panel 400 90 17
PFK 440 N/A .060" FR-4 Panel 250 55 N/A
PFK 632 N/A .060" FR-4 Panel 400 60 N/A
k-kssb-standoffs-metric
TYPE Panel 1 (1.5 mm FR-4 Fiberglass) INSTALLATION (kN) PUSHOUT (N) Panel 2 (Removable) MAX. FIRST ON FORCE (N) MIN. FIRST OFF FORCE (N) MIN. 15TH OFF FORCE (N)
KSSB Panel 1 (1.5 mm FR-4 Fiberglass) 2.2 484 Panel 2 (Removable) 57.7 13.3 4.4
k-kssb-standoffs-unified
TYPE Panel 1 (.060" FR-4 Fiberglass) INSTALLATION (lbs.) PUSHOUT (lbs.) Panel 2 (Removable) MAX. FIRST ON FORCE (lbs.) MIN. FIRST OFF FORCE (lbs.) MIN. 15TH OFF FORCE (lbs.)
KSSB Panel 1 (.060" FR-4 Fiberglass) 500 110 Panel 2 (Removable) 13 3.0 1.0
k-sfk-fasteners-metric
TYPE THICKNESS CODE INSTALLATION INTO PANEL 1 COLD-ROLLED STEEL (kN) INSTALLATION INTO PANEL 2 FR-4 FIBERGLASS (kN) PUSHOUT OF PANEL 2 (N)
SFK-3 0.8 6.2 1.8 200
SFK-3 1.0 8 1.8 200
SFK-3 1.2 8.9 1.8 200
SFK-3 1.6 10.2 1.8 200
SFK-5 0.8 11.1 1.8 400
SFK-5 1.0 13.5 1.8 400
SFK-5 1.2 15.6 1.8 400
SFK-5 1.6 17.8 1.8 400
k-sfk-fasteners-unified
TYPE THICKNESS CODE INSTALLATION INTO PANEL 1 COLD-ROLLED STEEL (lbs.) INSTALLATION INTO PANEL 2 FR-4 FIBERGLASS (lbs.) PUSHOUT OF PANEL 2 (lbs.)
SFK-3 0.8 1400 400 45
SFK-3 1.0 1800 400 45
SFK-3 1.2 2000 400 45
SFK-3 1.6 2300 400 45
SFK-5 0.8 2500 400 90
SFK-5 1.0 3000 400 90
SFK-5 1.2 3500 400 90
SFK-5 1.6 4000 400 90
k-smtpflsm-fasteners-metric
TYPE & THREAD SIZE MIN. TENSILE STRENGTH (N) REC. TIGHTENING TORQUE (N•m) TEST SHEET MATERIAL & THICKNESS PULL-OFF (N)
SMTPFLSM-M3 2900 0.61 1.5 mm P.C. Board 445
SMTPFLSM-M3.5 3269 0.8 1.5 mm P.C. Board 465
k-smtpflsm-fasteners-unified
TYPE & THREAD SIZE MIN. TENSILE STRENGTH (lbs.) REC. TIGHTENING TORQUE (in. lbs.) TEST SHEET MATERIAL & THICKNESS PULL-OFF (lbs.)
SMTPFLSM-440 556 4.4 .060" P.C. Board 100
SMTPFLSM-632 724 7.0 .060" P.C. Board 105
k-smtpr-metric
PART NUMBER TEST SHEET MATERIAL & THICKNESS PUSHOUT (N)
SMTPR-1ET .062" Single Layer FR-4 718
k-smtpr-unified
PART NUMBER TEST SHEET MATERIAL & THICKNESS PUSHOUT (lbs.)
SMTPR-1ET .062" Single Layer FR-4 161.4
k-smtra-fasteners-metric
PART NUMBER TEST SHEET MATERIAL & THICKNESS PUSHOUT (N) SIDE LOAD (N)
SMTRAM2-6-5 1.58 mm Single Layer FR-4 418.2 56.8
SMTRAM25-6-5 1.58 mm Single Layer FR-4 216.5 36.9
SMTRAM3-7-5 1.58 mm Single Layer FR-4 257.6 41.3
SMTRAM4-9-7 1.58 mm Single Layer FR-4 369.3 73.3
k-smtra-fasteners-unified
PART NUMBER TEST SHEET MATERIAL & THICKNESS PUSHOUT (lbs.) SIDE LOAD (lbs.)
SMTRA256-8-6 .062" Single Layer FR-4 51.7 7.1
SMTRA440-9-6 .062" Single Layer FR-4 89.5 10.8
SMTRA632-10-8 .062" Single Layer FR-4 110.3 8.4
SMTRA832-12-9 .062" Single Layer FR-4 137.2 21.2
k-smtsk-standoffs-metric
TYPE & SIZE PANEL 1 (BOTTOM) TEST SHEET MATERIAL PANEL 1 (BOTTOM) PUSHOUT
SMTSK-61.5 1.58 mm Single Layer FR-4 500 N
k-smtsk-standoffs-unified
TYPE & SIZE PANEL 1 (BOTTOM) TEST SHEET MATERIAL PANEL 1 (BOTTOM) PUSHOUT
SMTSK-6060 .062" Single Layer FR-4 113 lbs
k-smtso-smtsob-fasteners-metric
TYPE THREAD/THRU-HOLE CODE TEST SHEET MATERIAL & THICKNESS PUSHOUT (N) TORQUE-OUT (N•m) RATED CURRENT AMPS
SMTSO 080 .062" Single Layer FR-4 378.7 0.56 11
SMTSOB 080 .062" Single Layer FR-4 378.7 0.56
SMTSO 256 .062" Single Layer FR-4 251 1 25
SMTSOB 256 .062" Single Layer FR-4 251 1 40
SMTSO 440 .062" Single Layer FR-4 251 1 22
SMTSOB 440 .062" Single Layer FR-4 251 1 36
SMTSO 632 .062" Single Layer FR-4 416 1.6 34
SMTSOB 632 .062" Single Layer FR-4 416 1.6 55
SMTSO 832 .062" Single Layer FR-4 672 3 47
SMTSOB 832 .062" Single Layer FR-4 672 3 76
SMTSO 116 .062" Single Layer FR-4 22
SMTSOB 116 .062" Single Layer FR-4 37
SMTSO 143 .062" Single Layer FR-4 33
SMTSOB 143 .062" Single Layer FR-4 55
SMTSO M1 .062" Single Layer FR-4 378.7 0.56 11
SMTSOB M1 .062" Single Layer FR-4 378.7 0.56
SMTSO M1.2 .062" Single Layer FR-4 378.7 0.56 10
SMTSOB M1.2 .062" Single Layer FR-4 378.7 0.56
SMTSO M1.4 .062" Single Layer FR-4 378.7 0.56 10
SMTSOB M1.4 .062" Single Layer FR-4 378.7 0.56
SMTSO M1.6 .062" Single Layer FR-4 378.7 0.56 10
SMTSOB M1.6 .062" Single Layer FR-4 378.7 0.56
SMTSO M3 .062" Single Layer FR-4 251 1 22
SMTSOB M3 .062" Single Layer FR-4 251 1 36
SMTSO M3.5 .062" Single Layer FR-4 416 1.6 34
SMTSOB M3.5 .062" Single Layer FR-4 416 1.6 55
SMTSO M4 .062" Single Layer FR-4 672 3 47
SMTSOB M4 .062" Single Layer FR-4 672 3 76
SMTSO 3.1 .062" Single Layer FR-4 22
SMTSOB 3.1 .062" Single Layer FR-4 36
SMTSO 3.6 .062" Single Layer FR-4 33
SMTSOB 3.6 .062" Single Layer FR-4 55
SMTSO 4.2 .062" Single Layer FR-4 46
SMTSOB 4.2 .062" Single Layer FR-4 75
k-smtso-smtsob-fasteners-unified
TYPE THREAD/THRU-HOLE CODE TEST SHEET MATERIAL & THICKNESS PUSHOUT (lbs.) TORQUE-OUT (in.lbs.) RATED CURRENT AMPS
SMTSO 080 .062" Single Layer FR-4 85.1 4.94 11
SMTSOB 080 .062" Single Layer FR-4 85.1 4.94
SMTSO 256 .062" Single Layer FR-4 56.5 8.56 25
SMTSOB 256 .062" Single Layer FR-4 56.5 8.56 40
SMTSO 440 .062" Single Layer FR-4 56.5 8.56 22
SMTSOB 440 .062" Single Layer FR-4 56.5 8.56 36
SMTSO 632 .062" Single Layer FR-4 93.5 13.83 34
SMTSOB 632 .062" Single Layer FR-4 93.5 13.83 55
SMTSO 832 .062" Single Layer FR-4 151.1 26.96 47
SMTSOB 832 .062" Single Layer FR-4 151.1 26.96 76
SMTSO 116 .062" Single Layer FR-4 22
SMTSOB 116 .062" Single Layer FR-4 37
SMTSO 143 .062" Single Layer FR-4 33
SMTSOB 143 .062" Single Layer FR-4 55
SMTSO M1 .062" Single Layer FR-4 85.1 4.94 11
SMTSOB M1 .062" Single Layer FR-4 85.1 4.94
SMTSO M1.2 .062" Single Layer FR-4 85.1 4.94 10
SMTSOB M1.2 .062" Single Layer FR-4 85.1 4.94
SMTSO M1.4 .062" Single Layer FR-4 85.1 4.94 10
SMTSOB M1.4 .062" Single Layer FR-4 85.1 4.94
SMTSO M1.6 .062" Single Layer FR-4 85.1 4.94 10
SMTSOB M1.6 .062" Single Layer FR-4 85.1 4.94
SMTSO M3 .062" Single Layer FR-4 56.5 8.56 22
SMTSOB M3 .062" Single Layer FR-4 56.5 8.56 36
SMTSO M3.5 .062" Single Layer FR-4 93.5 13.83 34
SMTSOB M3.5 .062" Single Layer FR-4 93.5 13.83 55
SMTSO M4 .062" Single Layer FR-4 151.1 26.96 47
SMTSOB M4 .062" Single Layer FR-4 151.1 26.96 76
SMTSO 3.1 .062" Single Layer FR-4 22
SMTSOB 3.1 .062" Single Layer FR-4 36
SMTSO 3.6 .062" Single Layer FR-4 33
SMTSOB 3.6 .062" Single Layer FR-4 55
SMTSO 4.2 .062" Single Layer FR-4 46
SMTSOB 4.2 .062" Single Layer FR-4 75
k-smtss-standoffs-metric
"TYPE MATERIAL & SIZE" PANEL 1 (BOTTOM) TEST SHEET MATERIAL PANEL 1 (BOTTOM) PUSHOUT PANEL 2 (TOP) MAX. SNAP-ON FORCE
SMTSSS-4MM 1.58 mm Single Layer FR-4 500 N 89 N
k-smtss-standoffs-unified
"TYPE MATERIAL & SIZE" PANEL 1 (BOTTOM) TEST SHEET MATERIAL PANEL 1 (BOTTOM) PUSHOUT PANEL 2 (TOP) MAX. SNAP-ON FORCE
SMTSSS-156 .062" Single Layer FR-4 113 lbs 20 lbs
mpf-cds-fasteners-metric
TYPE TEST PIN MATERIAL INSTALLATION (kN) PULL-OFF (N) CLAMP LOAD (N)
CDS-100 6061-T6 Aluminum 0.33 18.1 7
mpf-mpp-pins-metric
TYPE PIN DIAMETER CODE TEST SHEET THICKNESS INSTALLATION (kN) PUSHOUT (N)
MPP 1MM 0.5mm Stainless Steel HRB 88 10 320
MPP 1.5MM 0.5mm Stainless Steel HRB 88 12 760
MPP 2MM 0.5mm Stainless Steel HRB 88 18 860
mpf-ms04-standoffs-metric
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m)) SHEET THICKNESS (mm) TEST SHEET MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL-THRU (N)
MSO4 M1 0.019 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1 0.019 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.2 0.036 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.2 0.036 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.4 0.057 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.4 0.057 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.6 0.084 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.6 0.084 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M2 0.175 0.3 300 Series Stainless Steel 11.1 150 0.25 500
MSO4 M2 0.175 0.43 300 Series Stainless Steel 11.1 200 0.3 500
mpf-ms04-standoffs-unified
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) SHEET THICKNESS (in.) TEST SHEET MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL-THRU (lbs.)
MSO4 080 0.65 0.013 300 Series Stainless Steel 2500 33 1.3 78
MSO4 080 .65 0.017 300 Series Stainless Steel 2500 45 2.2 78
MSO4 256 1.3 0.013 300 Series Stainless Steel 2500 33 2.2 110
MSO4 256 1.3 0.017 300 Series Stainless Steel 2500 45 2.6 110
mpf-msia-msib-inserts-metric
TYPE THREAD CODE LENGTH CODE TEST SHEET THICKNESS & MATERIAL PULLOUT (N) TORQUE-OUT (N•cm)
MSIA/MSIB M1 100 ABS 50 3.5
MSIA/MSIB M1 250 ABS 150 10
MSIA/MSIB M1.2 100 ABS 50 3.5
MSIA/MSIB M1.2 250 ABS 150 10
MSIA/MSIB M1.4 150 ABS 100 15
MSIA/MSIB M1.4 300 ABS 330 30
MSIA/MSIB M1.6 150 ABS 100 15
MSIA/MSIB M1.6 300 ABS 330 30
MSIA/MSIB M2 300 ABS 335 35
MSIA/MSIB M2 400 ABS 470 40
MSIA/MSIB M1 100 Polycarbonate 50 4.5
MSIA/MSIB M1 250 Polycarbonate 200 12
MSIA/MSIB M1.2 100 Polycarbonate 50 4.5
MSIA/MSIB M1.2 250 Polycarbonate 200 12
MSIA/MSIB M1.4 150 Polycarbonate 140 15
MSIA/MSIB M1.4 300 Polycarbonate 400 30
MSIA/MSIB M1.6 150 Polycarbonate 140 15
MSIA/MSIB M1.6 300 Polycarbonate 400 30
MSIA/MSIB M2 300 Polycarbonate 410 33
MSIA/MSIB M2 400 Polycarbonate 595 35
mpf-msofs-standoffs-metric
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m) TEST SHEET THICKNESS & MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
MSOFS M1 0.019 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.2 0.036 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.4 0.057 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.6 0.084 0.2 mm 300 Series Stainless Steel 8 406 0.146
MSOFS M2 0.175 0.2 mm 300 Series Stainless Steel 8 406 0.146
mpf-msofs-standoffs-unified
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) TEST SHEET THICKNESS & MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
MSOFS 080 0.65 .008" 300 Series Stainless Steel 1500 69.8 1.29
MSOFS 256 1.3 .008" 300 Series Stainless Steel 1800 91.2 1.29
mpf-smtso-fasteners-metric
TYPE SHEET THICKNESS & MATERIAL PUSHOUT (N) TORQUE-OUT (N•m)
SMTSO-080 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1.2 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1.4 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1.6 .062" Single Layer RF-4 378.7 0.56
mpf-smtso-fasteners-unified
TYPE SHEET THICKNESS & MATERIAL PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
SMTSO-080 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1.2 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1.4 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1.6 .062" Single Layer RF-4 85.1 4.94
mpf-t4-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (N) PULLOUT (N)
T4-10-025 300 Series Stainless Steel 2020 200
T4-10-050 300 Series Stainless Steel 2020 200
mpf-t4-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
T4-10-025 300 Series Stainless Steel 455 45
T4-10-050 300 Series Stainless Steel 455 45
mpf-ta-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (kN) PULLOUT (N)
TA-10-025 5052-H34 Aluminum 820 80
TA-10-050 5052-H34 Aluminum 820 80
TA-10-075 5052-H34 Aluminum 820 80
mpf-ta-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
TA-10-025 5052-H34 Aluminum 185 18
TA-10-050 5052-H34 Aluminum 185 18
TA-10-075 5052-H34 Aluminum 185 18
mpf-tfa-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (N) PULLOUT (N)
TFA-10-025 5052-H34 Aluminum 450 40
TFA-10-035 5052-H34 Aluminum 450 40
TFA-10-045 5052-H34 Aluminum 450 40
TFA-10-055 5052-H34 Aluminum 450 40
mpf-tfa-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
TFA-10-025 5052-H34 Aluminum 101 9
TFA-10-035 5052-H34 Aluminum 101 9
TFA-10-045 5052-H34 Aluminum 101 9
TFA-10-055 5052-H34 Aluminum 101 9
mpf-tka-tk4-pins-metric
TYPE TEST BASE PANEL MATERIAL DEPTH OF ENGAGEMENT (mm) INSTALLATION (N) PULLOUT (N)
TKA-10 ABS 0.8 133 9
TKA-10 ABS 1 133 14
TKA-10 ABS 1.3 133 19
TKA-10 ABS 1.5 178 24
TKA-10 ABS 1.8 178 31
TKA-10 ABS 2 222 35
TKA-10 ABS 2.3 222 41
TKA-10 ABS 2.8 245 53
TKA-10 Polycarbonate 0.8 222 25
TKA-10 Polycarbonate 1 267 37
TKA-10 Polycarbonate 1.3 267 53
TKA-10 Polycarbonate 1.5 311 68
TKA-10 Polycarbonate 1.8 334 86
TKA-10 Polycarbonate 2 378 98
TKA-10 Polycarbonate 2.3 400 113
TK4-10 Polycarbonate 2.8 423 146
TK4-10 Magnesium Casting (AZ91D) 0.8 445 29
TK4-10 Magnesium Casting (AZ91D) 1 489 43
TK4-10 Magnesium Casting (AZ91D) 1.3 534 61
TK4-10 Magnesium Casting (AZ91D) 1.5 578 78
TK4-10 Magnesium Casting (AZ91D) 1.8 623 99
TK4-10 Magnesium Casting (AZ91D) 2 667 113
TK4-10 Magnesium Casting (AZ91D) 2.3 712 131
TK4-10 Magnesium Casting (AZ91D) 2.8 801 169
mpf-tka-tk4-pins-unified
TYPE TEST BASE PANEL MATERIAL DEPTH OF ENGAGEMENT (in.) INSTALLATION (lbs.) PULLOUT (lbs.)
TKA-10 ABS 0.0315 30 2
TKA-10 ABS 0.0394 30 3
TKA-10 ABS 0.0492 30 4
TKA-10 ABS 0.0590 40 6
TKA-10 ABS 0.0708 40 7
TKA-10 ABS 0.0787 50 8
TKA-10 ABS 0.0886 50 9
TKA-10 ABS 0.1102 55 12
TKA-10 Polycarbonate 0.0315 50 6
TKA-10 Polycarbonate 0.0394 60 8
TKA-10 Polycarbonate 0.0492 60 12
TKA-10 Polycarbonate 0.0590 70 15
TKA-10 Polycarbonate 0.0708 75 19
TKA-10 Polycarbonate 0.0787 85 22
TKA-10 Polycarbonate 0.0886 90 25
TK4-10 Polycarbonate 0.1102 95 33
TK4-10 Magnesium Casting (AZ91D) 0.0315 100 7
TK4-10 Magnesium Casting (AZ91D) 0.0394 110 10
TK4-10 Magnesium Casting (AZ91D) 0.0492 120 14
TK4-10 Magnesium Casting (AZ91D) 0.0590 130 18
TK4-10 Magnesium Casting (AZ91D) 0.0708 140 22
TK4-10 Magnesium Casting (AZ91D) 0.0787 150 25
TK4-10 Magnesium Casting (AZ91D) 0.0886 160 29
TK4-10 Magnesium Casting (AZ91D) 0.1102 180 38
mpf-ts4-fasteners-metric
TYPE TESTED TOP SHEET THICKNESS SHEET MATERIAL INSTALLATION (N) PULLOUT (N) TORQUE TO REMOVE (N•cm)
TS4-10-025 0.254 mm / .01" 5052-H34 Aluminum HRB 63 / HB 114 556 80 3.3
TS4-10-050 0.533 mm / .021" 5052-H34 Aluminum HRB 63 / HB 114 556 80 3.3
TS4-10-025 0.254 mm / .01" 304 Stainless Steel HRB 89/HB 187 1423 125 4.6
TS4-10-050 0.533 mm / .021" 304 Stainless Steel HRB 89/HB 187 1423 125 4.6
mpf-ts4-fasteners-unified
TYPE TESTED TOP SHEET THICKNESS SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.) TORQUE TO REMOVE (in. oz.)
TS4-10-025 0.254 mm / .01" 5052-H34 Aluminum HRB 63 / HB 114 125 18 4.7
TS4-10-050 0.533 mm / .021" 5052-H34 Aluminum HRB 63 / HB 114 125 18 4.7
TS4-10-025 0.254 mm / .01" 304 Stainless Steel HRB 89/HB 187 320 28 6.5
TS4-10-050 0.533 mm / .021" 304 Stainless Steel HRB 89/HB 187 320 28 6.5

Inventory

Distributor Quantity Contact Phone Address Locations

Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”