SSC-4MM-12
SNAP-TOP® Standoffs – Types SSA, SSC, SSS
SSC-4MM-12
SNAP-TOP® Standoffs – Types SSA, SSC, SSS
PEM SNAP-TOP® Standoffs (Types SSA, SSS, SSC) are designed for permanent installation into metal panels or PC boards.
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using any standard press.
Specifications
- Panel 1 Material
- Metal
- Panel 2 (Top) Material
- PC Board or Metal
- Standard Material
- 400 Series Stainless Steel
- Standard Finish
- Passivated and/or tested per ASTM A380
- Anvil Hole Diameter
- 5.49 – 5.56
- Panel 1 (Bottom) Hardness Max.
- HRB 70 / HB 125
- Panel 2 (Top) Hardness Max.
- No limit
- Product Category
- SNAP-TOP® Standoffs – Types SSA, SSC, SSS
- CAD Supplier
- PennEngineering® (PEM®)
- CADPartID
- 103747
- Base Panel Material
- Aluminum, Steel
- Brand
- PEM
- Fastener Characteristics
- Unthreaded
- Installation Equipment/Method
- C-Frame Automatic Feed, C-Frame Manual Feed
- L Len Pm 005in Or 13mm
- 12mm
- PEM Product Family
- SSA
- Product Type
- Standoffs
- Technology Type
- Self-Clinching
- Unit (Metric/Unified)
- Metric
- B ± 0.13_mm
- 4.78mm
- H ± 0.13_mm
- 6.35mm
- C Max._mm
- 5.39mm
- P ± 0.13_mm
- 3.58mm
- Panel 1 (Bottom) Thickness Min._mm
- 1mm
- Panel 1 (Bottom) Edge Distance C1 Min._mm
- 6.60mm
- Panel 1 (Bottom) Mounting Hole B + 0.08_mm
- 5.41mm
- Panel 2 (Top) Edge Distance C2 Min._mm
- 2.54mm
- Panel 2 (Top) Mounting Hole A +0.08_mm
- 4.00mm
- Panel 2 (Top) Thickness Range_mm
- 1.00 to 1.80mm
Resources
Inventory
Distributor | Quantity | Contact | Phone | Address | Locations |
---|