SSS-4MM-8ZI

SNAP-TOP® Standoffs – Types SSA, SSC, SSS

SSS-4MM-8ZI

SNAP-TOP® Standoffs – Types SSA, SSC, SSS

PEM SNAP-TOP® Standoffs (Types SSA, SSS, SSC) are designed for permanent installation into metal panels or PC boards.

These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.

These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using any standard press.

Specifications

Panel 1 Material
Metal
Panel 2 (Top) Material
PC Board or Metal
Standard Material
Carbon Steel
Standard Finish
colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633
Anvil Hole Diameter
5.49 – 5.56
Panel 1 (Bottom) Hardness Max.
HRB 60 / HB 107
Panel 2 (Top) Hardness Max.
No limit
Product Category
SNAP-TOP® Standoffs – Types SSA, SSC, SSS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103747
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Unthreaded
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed
L Len Pm 005in Or 13mm
8mm
PEM Product Family
SSA
Product Type
Standoffs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Metric
B ± 0.13_mm
4.78mm
H ± 0.13_mm
6.35mm
C Max._mm
5.39mm
P ± 0.13_mm
3.58mm
Panel 1 (Bottom) Thickness Min._mm
1mm
Panel 1 (Bottom) Edge Distance C1 Min._mm
6.60mm
Panel 1 (Bottom) Mounting Hole B + 0.08_mm
5.41mm
Panel 2 (Top) Edge Distance C2 Min._mm
2.54mm
Panel 2 (Top) Mounting Hole A +0.08_mm
4.00mm
Panel 2 (Top) Thickness Range_mm
1.00 to 1.80mm

Resources

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”