TFA-10-035
TFA microPEM® FLEXTACK FASTENERS
TFA-10-035
TFA microPEM® FLEXTACK FASTENERS
The Bellville washer shaped head of the microPEM® FlexTack™ fastener is designed to increase vertical installation tolerance in designs.
- Alternative to using micro-screws, eliminating the need to tap or use threaded inserts.
- Installation time to simply press the part in (1.5 seconds) is less than the time to thread a screw in equals less total installed cost.
- The Belleville-shaped head allows for stack-up tolerance relief in a design.
-
Eliminates the following:
- Cost of screw, patch to prevent loosening, threaded insert or tapped hole and driver bits
- Cost of rework due to cross-threading or driver bit “cam-out”
Especificaciones
- Material del inserto
- Aluminio
- Acabado Estandard
- Sin acabado, Plano
- Para uso en láminas de dureza
- HRB 45 or Less (Hardness Rockwell “B” Scale)
HB 84 or Less (Hardness Brinell) - Categoría del producto
- TFA microPEM® FLEXTACK FASTENERS
- Proveedor CAD
- PennEngineering® (PEM®)
- Identificación de pieza CAD
- 123018
- Tipo de aplicación
- Electrónica de consumo
- Material del panel base
- Aluminio
- Marca
- microPem
- Características del inserto
- Micro
- Industria
- Electrónica automotriz, Electrónica de consumo
- Equipo/método de instalación
- Herramientas manuales
- Producto de la familia PEM
- MPF
- Tipo de producto
- Otros insertos
- Tipo de tecnología
- Auto-clinchado
- A ± 0.025mm/±.001in_in
- .030in
- A ± 0.025mm/±.001in_mm
- 0.77mm
- B ± 0.075mm/±.003in_in
- .050in
- B ± 0.075mm/±.003in_mm
- 1.26mm
- Base Panel Hole Size -0.05mm/ -.002in_in
- .040in
- Base Panel Hole Size -0.05mm/ -.002in_mm
- 1.02mm
- Base Panel Hole Size Code
- 10
- Base Panel Min. Sheet Thickness_in
- .035in
- Base Panel Min. Sheet Thickness_mm
- 0.89mm
- H ± 0.10mm/±.004in_in
- .115in
- H ± 0.10mm/±.004in_mm
- 2.91mm
- Min. Dist. Hole C/L to Edge_in
- .039in
- Dist. Mín orificio cercano al borde_mm
- 1mm
- C Max._in
- .035in
- C Máx._mm
- 0.89mm
- P ± 0.05mm/±.002in_in
- .048in
- P ± 0.05mm/±.002in_mm
- 1.21mm
- T ± 0.10mm/±.004in_in
- .012in
- T ± 0.10mm/±.004in_mm
- 0.3mm
- Top Sheet Hole Size ± 0.05mm/± .002in_in
- .058in
- Top Sheet Hole Size ± 0.05mm/± .002in_mm
- 1.47mm
- Top Sheet Thickness Code
- 035
- Top Sheet Thickness_in
- .011 to .015in
- Top Sheet Thickness_mm
- 0.28 to 0.38mm
Recursos
Datos de instalación y rendimiento
| TYPE | TEST PIN MATERIAL | INSTALLATION (kN) | PULL-OFF (N) | CLAMP LOAD (N) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| CDS-100 | 6061-T6 Aluminum | 0.33 | 18.1 | 7 |
| TYPE | PIN DIAMETER CODE | TEST SHEET THICKNESS | INSTALLATION (kN) | PUSHOUT (N) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MPP | 1MM | 0.5mm Stainless Steel HRB 88 | 10 | 320 | ||||||
| MPP | 1.5MM | 0.5mm Stainless Steel HRB 88 | 12 | 760 | ||||||
| MPP | 2MM | 0.5mm Stainless Steel HRB 88 | 18 | 860 |
| TYPE | THREAD CODE | MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m)) | SHEET THICKNESS (mm) | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL-THRU (N) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| MSO4 | M1 | 0.019 | 0.3 | 300 Series Stainless Steel | 11.1 | 150 | 0.15 | 350 | ||
| MSO4 | M1 | 0.019 | 0.43 | 300 Series Stainless Steel | 11.1 | 200 | 0.25 | 350 | ||
| MSO4 | M1.2 | 0.036 | 0.3 | 300 Series Stainless Steel | 11.1 | 150 | 0.15 | 350 | ||
| MSO4 | M1.2 | 0.036 | 0.43 | 300 Series Stainless Steel | 11.1 | 200 | 0.25 | 350 | ||
| MSO4 | M1.4 | 0.057 | 0.3 | 300 Series Stainless Steel | 11.1 | 150 | 0.15 | 350 | ||
| MSO4 | M1.4 | 0.057 | 0.43 | 300 Series Stainless Steel | 11.1 | 200 | 0.25 | 350 | ||
| MSO4 | M1.6 | 0.084 | 0.3 | 300 Series Stainless Steel | 11.1 | 150 | 0.15 | 350 | ||
| MSO4 | M1.6 | 0.084 | 0.43 | 300 Series Stainless Steel | 11.1 | 200 | 0.25 | 350 | ||
| MSO4 | M2 | 0.175 | 0.3 | 300 Series Stainless Steel | 11.1 | 150 | 0.25 | 500 | ||
| MSO4 | M2 | 0.175 | 0.43 | 300 Series Stainless Steel | 11.1 | 200 | 0.3 | 500 |
| TYPE | THREAD CODE | MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) | SHEET THICKNESS (in.) | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL-THRU (lbs.) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| MSO4 | 080 | 0.65 | 0.013 | 300 Series Stainless Steel | 2500 | 33 | 1.3 | 78 | ||
| MSO4 | 080 | .65 | 0.017 | 300 Series Stainless Steel | 2500 | 45 | 2.2 | 78 | ||
| MSO4 | 256 | 1.3 | 0.013 | 300 Series Stainless Steel | 2500 | 33 | 2.2 | 110 | ||
| MSO4 | 256 | 1.3 | 0.017 | 300 Series Stainless Steel | 2500 | 45 | 2.6 | 110 |
| TYPE | THREAD CODE | LENGTH CODE | TEST SHEET THICKNESS & MATERIAL | PULLOUT (N) | TORQUE-OUT (N•cm) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MSIA/MSIB | M1 | 100 | ABS | 50 | 3.5 | |||||
| MSIA/MSIB | M1 | 250 | ABS | 150 | 10 | |||||
| MSIA/MSIB | M1.2 | 100 | ABS | 50 | 3.5 | |||||
| MSIA/MSIB | M1.2 | 250 | ABS | 150 | 10 | |||||
| MSIA/MSIB | M1.4 | 150 | ABS | 100 | 15 | |||||
| MSIA/MSIB | M1.4 | 300 | ABS | 330 | 30 | |||||
| MSIA/MSIB | M1.6 | 150 | ABS | 100 | 15 | |||||
| MSIA/MSIB | M1.6 | 300 | ABS | 330 | 30 | |||||
| MSIA/MSIB | M2 | 300 | ABS | 335 | 35 | |||||
| MSIA/MSIB | M2 | 400 | ABS | 470 | 40 | |||||
| MSIA/MSIB | M1 | 100 | Polycarbonate | 50 | 4.5 | |||||
| MSIA/MSIB | M1 | 250 | Polycarbonate | 200 | 12 | |||||
| MSIA/MSIB | M1.2 | 100 | Polycarbonate | 50 | 4.5 | |||||
| MSIA/MSIB | M1.2 | 250 | Polycarbonate | 200 | 12 | |||||
| MSIA/MSIB | M1.4 | 150 | Polycarbonate | 140 | 15 | |||||
| MSIA/MSIB | M1.4 | 300 | Polycarbonate | 400 | 30 | |||||
| MSIA/MSIB | M1.6 | 150 | Polycarbonate | 140 | 15 | |||||
| MSIA/MSIB | M1.6 | 300 | Polycarbonate | 400 | 30 | |||||
| MSIA/MSIB | M2 | 300 | Polycarbonate | 410 | 33 | |||||
| MSIA/MSIB | M2 | 400 | Polycarbonate | 595 | 35 |
| TYPE | THREAD CODE | MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| MSOFS | M1 | 0.019 | 0.2 mm 300 Series Stainless Steel | 6.67 | 311 | 0.146 | ||||
| MSOFS | M1.2 | 0.036 | 0.2 mm 300 Series Stainless Steel | 6.67 | 311 | 0.146 | ||||
| MSOFS | M1.4 | 0.057 | 0.2 mm 300 Series Stainless Steel | 6.67 | 311 | 0.146 | ||||
| MSOFS | M1.6 | 0.084 | 0.2 mm 300 Series Stainless Steel | 8 | 406 | 0.146 | ||||
| MSOFS | M2 | 0.175 | 0.2 mm 300 Series Stainless Steel | 8 | 406 | 0.146 |
| TYPE | THREAD CODE | MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| MSOFS | 080 | 0.65 | .008" 300 Series Stainless Steel | 1500 | 69.8 | 1.29 | ||||
| MSOFS | 256 | 1.3 | .008" 300 Series Stainless Steel | 1800 | 91.2 | 1.29 |
| TYPE | SHEET THICKNESS & MATERIAL | PUSHOUT (N) | TORQUE-OUT (N•m) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SMTSO-080 | .062" Single Layer RF-4 | 378.7 | 0.56 | |||||||
| SMTSO-M1 | .062" Single Layer RF-4 | 378.7 | 0.56 | |||||||
| SMTSO-M1.2 | .062" Single Layer RF-4 | 378.7 | 0.56 | |||||||
| SMTSO-M1.4 | .062" Single Layer RF-4 | 378.7 | 0.56 | |||||||
| SMTSO-M1.6 | .062" Single Layer RF-4 | 378.7 | 0.56 |
| TYPE | SHEET THICKNESS & MATERIAL | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SMTSO-080 | .062" Single Layer RF-4 | 85.1 | 4.94 | |||||||
| SMTSO-M1 | .062" Single Layer RF-4 | 85.1 | 4.94 | |||||||
| SMTSO-M1.2 | .062" Single Layer RF-4 | 85.1 | 4.94 | |||||||
| SMTSO-M1.4 | .062" Single Layer RF-4 | 85.1 | 4.94 | |||||||
| SMTSO-M1.6 | .062" Single Layer RF-4 | 85.1 | 4.94 |
| TYPE | SHEET MATERIAL | INSTALLATION (N) | PULLOUT (N) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| T4-10-025 | 300 Series Stainless Steel | 2020 | 200 | |||||||
| T4-10-050 | 300 Series Stainless Steel | 2020 | 200 |
| TYPE | SHEET MATERIAL | INSTALLATION (lbs.) | PULLOUT (lbs.) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| T4-10-025 | 300 Series Stainless Steel | 455 | 45 | |||||||
| T4-10-050 | 300 Series Stainless Steel | 455 | 45 |
| TYPE | SHEET MATERIAL | INSTALLATION (kN) | PULLOUT (N) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| TA-10-025 | 5052-H34 Aluminum | 820 | 80 | |||||||
| TA-10-050 | 5052-H34 Aluminum | 820 | 80 | |||||||
| TA-10-075 | 5052-H34 Aluminum | 820 | 80 |
| TYPE | SHEET MATERIAL | INSTALLATION (lbs.) | PULLOUT (lbs.) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| TA-10-025 | 5052-H34 Aluminum | 185 | 18 | |||||||
| TA-10-050 | 5052-H34 Aluminum | 185 | 18 | |||||||
| TA-10-075 | 5052-H34 Aluminum | 185 | 18 |
| TYPE | SHEET MATERIAL | INSTALLATION (N) | PULLOUT (N) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| TFA-10-025 | 5052-H34 Aluminum | 450 | 40 | |||||||
| TFA-10-035 | 5052-H34 Aluminum | 450 | 40 | |||||||
| TFA-10-045 | 5052-H34 Aluminum | 450 | 40 | |||||||
| TFA-10-055 | 5052-H34 Aluminum | 450 | 40 |
| TYPE | SHEET MATERIAL | INSTALLATION (lbs.) | PULLOUT (lbs.) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| TFA-10-025 | 5052-H34 Aluminum | 101 | 9 | |||||||
| TFA-10-035 | 5052-H34 Aluminum | 101 | 9 | |||||||
| TFA-10-045 | 5052-H34 Aluminum | 101 | 9 | |||||||
| TFA-10-055 | 5052-H34 Aluminum | 101 | 9 |
| TYPE | TEST BASE PANEL MATERIAL | DEPTH OF ENGAGEMENT (mm) | INSTALLATION (N) | PULLOUT (N) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| TKA-10 | ABS | 0.8 | 133 | 9 | ||||||
| TKA-10 | ABS | 1 | 133 | 14 | ||||||
| TKA-10 | ABS | 1.3 | 133 | 19 | ||||||
| TKA-10 | ABS | 1.5 | 178 | 24 | ||||||
| TKA-10 | ABS | 1.8 | 178 | 31 | ||||||
| TKA-10 | ABS | 2 | 222 | 35 | ||||||
| TKA-10 | ABS | 2.3 | 222 | 41 | ||||||
| TKA-10 | ABS | 2.8 | 245 | 53 | ||||||
| TKA-10 | Polycarbonate | 0.8 | 222 | 25 | ||||||
| TKA-10 | Polycarbonate | 1 | 267 | 37 | ||||||
| TKA-10 | Polycarbonate | 1.3 | 267 | 53 | ||||||
| TKA-10 | Polycarbonate | 1.5 | 311 | 68 | ||||||
| TKA-10 | Polycarbonate | 1.8 | 334 | 86 | ||||||
| TKA-10 | Polycarbonate | 2 | 378 | 98 | ||||||
| TKA-10 | Polycarbonate | 2.3 | 400 | 113 | ||||||
| TK4-10 | Polycarbonate | 2.8 | 423 | 146 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.8 | 445 | 29 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 1 | 489 | 43 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 1.3 | 534 | 61 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 1.5 | 578 | 78 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 1.8 | 623 | 99 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 2 | 667 | 113 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 2.3 | 712 | 131 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 2.8 | 801 | 169 |
| TYPE | TEST BASE PANEL MATERIAL | DEPTH OF ENGAGEMENT (in.) | INSTALLATION (lbs.) | PULLOUT (lbs.) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| TKA-10 | ABS | 0.0315 | 30 | 2 | ||||||
| TKA-10 | ABS | 0.0394 | 30 | 3 | ||||||
| TKA-10 | ABS | 0.0492 | 30 | 4 | ||||||
| TKA-10 | ABS | 0.0590 | 40 | 6 | ||||||
| TKA-10 | ABS | 0.0708 | 40 | 7 | ||||||
| TKA-10 | ABS | 0.0787 | 50 | 8 | ||||||
| TKA-10 | ABS | 0.0886 | 50 | 9 | ||||||
| TKA-10 | ABS | 0.1102 | 55 | 12 | ||||||
| TKA-10 | Polycarbonate | 0.0315 | 50 | 6 | ||||||
| TKA-10 | Polycarbonate | 0.0394 | 60 | 8 | ||||||
| TKA-10 | Polycarbonate | 0.0492 | 60 | 12 | ||||||
| TKA-10 | Polycarbonate | 0.0590 | 70 | 15 | ||||||
| TKA-10 | Polycarbonate | 0.0708 | 75 | 19 | ||||||
| TKA-10 | Polycarbonate | 0.0787 | 85 | 22 | ||||||
| TKA-10 | Polycarbonate | 0.0886 | 90 | 25 | ||||||
| TK4-10 | Polycarbonate | 0.1102 | 95 | 33 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.0315 | 100 | 7 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.0394 | 110 | 10 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.0492 | 120 | 14 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.0590 | 130 | 18 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.0708 | 140 | 22 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.0787 | 150 | 25 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.0886 | 160 | 29 | ||||||
| TK4-10 | Magnesium Casting (AZ91D) | 0.1102 | 180 | 38 |
| TYPE | TESTED TOP SHEET THICKNESS | SHEET MATERIAL | INSTALLATION (N) | PULLOUT (N) | TORQUE TO REMOVE (N•cm) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| TS4-10-025 | 0.254 mm / .01" | 5052-H34 Aluminum HRB 63 / HB 114 | 556 | 80 | 3.3 | |||||
| TS4-10-050 | 0.533 mm / .021" | 5052-H34 Aluminum HRB 63 / HB 114 | 556 | 80 | 3.3 | |||||
| TS4-10-025 | 0.254 mm / .01" | 304 Stainless Steel HRB 89/HB 187 | 1423 | 125 | 4.6 | |||||
| TS4-10-050 | 0.533 mm / .021" | 304 Stainless Steel HRB 89/HB 187 | 1423 | 125 | 4.6 |
| TYPE | TESTED TOP SHEET THICKNESS | SHEET MATERIAL | INSTALLATION (lbs.) | PULLOUT (lbs.) | TORQUE TO REMOVE (in. oz.) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| TS4-10-025 | 0.254 mm / .01" | 5052-H34 Aluminum HRB 63 / HB 114 | 125 | 18 | 4.7 | |||||
| TS4-10-050 | 0.533 mm / .021" | 5052-H34 Aluminum HRB 63 / HB 114 | 125 | 18 | 4.7 | |||||
| TS4-10-025 | 0.254 mm / .01" | 304 Stainless Steel HRB 89/HB 187 | 320 | 28 | 6.5 | |||||
| TS4-10-050 | 0.533 mm / .021" | 304 Stainless Steel HRB 89/HB 187 | 320 | 28 | 6.5 |
Inventario
| Distribuidor | Cantidad | Contacto | Teléfono | Dirección | Ubicaciones |
|---|