TFA-10-045

TFA microPEM® FLEXTACK FASTENERS

TFA-10-045

TFA microPEM® FLEXTACK FASTENERS

The Bellville washer shaped head of the microPEM® FlexTack™ fastener is designed to increase vertical installation tolerance in designs.

  • Alternative to using micro-screws, eliminating the need to tap or use threaded inserts.
  • Installation time to simply press the part in (1.5 seconds) is less than the time to thread a screw in equals less total installed cost.
  • The Belleville-shaped head allows for stack-up tolerance relief in a design.
  • Eliminates the following:

    • Cost of screw, patch to prevent loosening, threaded insert or tapped hole and driver bits
    • Cost of rework due to cross-threading or driver bit “cam-out”

仕様

ファスナー材質
アルミニウム
表面処理
仕上げなし, 無地
For Use in Sheet Hardness
HRB 45 or Less (Hardness Rockwell “B” Scale)
HB 84 or Less (Hardness Brinell)
Product Category
TFA microPEM® FLEXTACK FASTENERS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
123018
アプリケーション
家電製品
下板の材質
アルミニウム
ブランド
microPEM
ファスナーの特徴
マイクロ
業界
カーエレクトロニクス, 家電製品
取付け用機材
ハンドツール
PEM®製品
MPF
製品
その他のファスナー
技術
セルフクリンチ
A ± 0.025mm/±.001in_in
.034in
A ± 0.025mm/±.001in_mm
0.87mm
B ± 0.075mm/±.003in_in
.054in
B ± 0.075mm/±.003in_mm
1.37mm
Base Panel Hole Size -0.05mm/ -.002in_in
.040in
Base Panel Hole Size -0.05mm/ -.002in_mm
1.02mm
Base Panel Hole Size Code
10
Base Panel Min. Sheet Thickness_in
.035in
Base Panel Min. Sheet Thickness_mm
0.89mm
H ± 0.10mm/±.004in_in
.115in
H ± 0.10mm/±.004in_mm
2.91mm
Min. Dist. Hole C/L to Edge_in
.039in
Min. Dist. Hole C/L to Edge_mm
1mm
C Max._in
.035in
C Max._mm
0.89mm
P ± 0.05mm/±.002in_in
.048in
P ± 0.05mm/±.002in_mm
1.21mm
T ± 0.10mm/±.004in_in
.012in
T ± 0.10mm/±.004in_mm
0.3mm
Top Sheet Hole Size ± 0.05mm/± .002in_in
.058in
Top Sheet Hole Size ± 0.05mm/± .002in_mm
1.47mm
Top Sheet Thickness Code
045
Top Sheet Thickness_in
.015 to .019in
Top Sheet Thickness_mm
0.38 to 0.48mm

リソース

データシート

mpf-cds-fasteners-metric
TYPE TEST PIN MATERIAL INSTALLATION (kN) PULL-OFF (N) CLAMP LOAD (N)
CDS-100 6061-T6 Aluminum 0.33 18.1 7
mpf-mpp-pins-metric
TYPE PIN DIAMETER CODE TEST SHEET THICKNESS INSTALLATION (kN) PUSHOUT (N)
MPP 1MM 0.5mm Stainless Steel HRB 88 10 320
MPP 1.5MM 0.5mm Stainless Steel HRB 88 12 760
MPP 2MM 0.5mm Stainless Steel HRB 88 18 860
mpf-ms04-standoffs-metric
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m)) SHEET THICKNESS (mm) TEST SHEET MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL-THRU (N)
MSO4 M1 0.019 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1 0.019 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.2 0.036 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.2 0.036 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.4 0.057 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.4 0.057 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.6 0.084 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.6 0.084 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M2 0.175 0.3 300 Series Stainless Steel 11.1 150 0.25 500
MSO4 M2 0.175 0.43 300 Series Stainless Steel 11.1 200 0.3 500
mpf-ms04-standoffs-unified
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) SHEET THICKNESS (in.) TEST SHEET MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL-THRU (lbs.)
MSO4 080 0.65 0.013 300 Series Stainless Steel 2500 33 1.3 78
MSO4 080 .65 0.017 300 Series Stainless Steel 2500 45 2.2 78
MSO4 256 1.3 0.013 300 Series Stainless Steel 2500 33 2.2 110
MSO4 256 1.3 0.017 300 Series Stainless Steel 2500 45 2.6 110
mpf-msia-msib-inserts-metric
TYPE THREAD CODE LENGTH CODE TEST SHEET THICKNESS & MATERIAL PULLOUT (N) TORQUE-OUT (N•cm)
MSIA/MSIB M1 100 ABS 50 3.5
MSIA/MSIB M1 250 ABS 150 10
MSIA/MSIB M1.2 100 ABS 50 3.5
MSIA/MSIB M1.2 250 ABS 150 10
MSIA/MSIB M1.4 150 ABS 100 15
MSIA/MSIB M1.4 300 ABS 330 30
MSIA/MSIB M1.6 150 ABS 100 15
MSIA/MSIB M1.6 300 ABS 330 30
MSIA/MSIB M2 300 ABS 335 35
MSIA/MSIB M2 400 ABS 470 40
MSIA/MSIB M1 100 Polycarbonate 50 4.5
MSIA/MSIB M1 250 Polycarbonate 200 12
MSIA/MSIB M1.2 100 Polycarbonate 50 4.5
MSIA/MSIB M1.2 250 Polycarbonate 200 12
MSIA/MSIB M1.4 150 Polycarbonate 140 15
MSIA/MSIB M1.4 300 Polycarbonate 400 30
MSIA/MSIB M1.6 150 Polycarbonate 140 15
MSIA/MSIB M1.6 300 Polycarbonate 400 30
MSIA/MSIB M2 300 Polycarbonate 410 33
MSIA/MSIB M2 400 Polycarbonate 595 35
mpf-msofs-standoffs-metric
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m) TEST SHEET THICKNESS & MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
MSOFS M1 0.019 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.2 0.036 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.4 0.057 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.6 0.084 0.2 mm 300 Series Stainless Steel 8 406 0.146
MSOFS M2 0.175 0.2 mm 300 Series Stainless Steel 8 406 0.146
mpf-msofs-standoffs-unified
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) TEST SHEET THICKNESS & MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
MSOFS 080 0.65 .008" 300 Series Stainless Steel 1500 69.8 1.29
MSOFS 256 1.3 .008" 300 Series Stainless Steel 1800 91.2 1.29
mpf-smtso-fasteners-metric
TYPE SHEET THICKNESS & MATERIAL PUSHOUT (N) TORQUE-OUT (N•m)
SMTSO-080 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1.2 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1.4 .062" Single Layer RF-4 378.7 0.56
SMTSO-M1.6 .062" Single Layer RF-4 378.7 0.56
mpf-smtso-fasteners-unified
TYPE SHEET THICKNESS & MATERIAL PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
SMTSO-080 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1.2 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1.4 .062" Single Layer RF-4 85.1 4.94
SMTSO-M1.6 .062" Single Layer RF-4 85.1 4.94
mpf-t4-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (N) PULLOUT (N)
T4-10-025 300 Series Stainless Steel 2020 200
T4-10-050 300 Series Stainless Steel 2020 200
mpf-t4-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
T4-10-025 300 Series Stainless Steel 455 45
T4-10-050 300 Series Stainless Steel 455 45
mpf-ta-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (kN) PULLOUT (N)
TA-10-025 5052-H34 Aluminum 820 80
TA-10-050 5052-H34 Aluminum 820 80
TA-10-075 5052-H34 Aluminum 820 80
mpf-ta-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
TA-10-025 5052-H34 Aluminum 185 18
TA-10-050 5052-H34 Aluminum 185 18
TA-10-075 5052-H34 Aluminum 185 18
mpf-tfa-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (N) PULLOUT (N)
TFA-10-025 5052-H34 Aluminum 450 40
TFA-10-035 5052-H34 Aluminum 450 40
TFA-10-045 5052-H34 Aluminum 450 40
TFA-10-055 5052-H34 Aluminum 450 40
mpf-tfa-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
TFA-10-025 5052-H34 Aluminum 101 9
TFA-10-035 5052-H34 Aluminum 101 9
TFA-10-045 5052-H34 Aluminum 101 9
TFA-10-055 5052-H34 Aluminum 101 9
mpf-tka-tk4-pins-metric
TYPE TEST BASE PANEL MATERIAL DEPTH OF ENGAGEMENT (mm) INSTALLATION (N) PULLOUT (N)
TKA-10 ABS 0.8 133 9
TKA-10 ABS 1 133 14
TKA-10 ABS 1.3 133 19
TKA-10 ABS 1.5 178 24
TKA-10 ABS 1.8 178 31
TKA-10 ABS 2 222 35
TKA-10 ABS 2.3 222 41
TKA-10 ABS 2.8 245 53
TKA-10 Polycarbonate 0.8 222 25
TKA-10 Polycarbonate 1 267 37
TKA-10 Polycarbonate 1.3 267 53
TKA-10 Polycarbonate 1.5 311 68
TKA-10 Polycarbonate 1.8 334 86
TKA-10 Polycarbonate 2 378 98
TKA-10 Polycarbonate 2.3 400 113
TK4-10 Polycarbonate 2.8 423 146
TK4-10 Magnesium Casting (AZ91D) 0.8 445 29
TK4-10 Magnesium Casting (AZ91D) 1 489 43
TK4-10 Magnesium Casting (AZ91D) 1.3 534 61
TK4-10 Magnesium Casting (AZ91D) 1.5 578 78
TK4-10 Magnesium Casting (AZ91D) 1.8 623 99
TK4-10 Magnesium Casting (AZ91D) 2 667 113
TK4-10 Magnesium Casting (AZ91D) 2.3 712 131
TK4-10 Magnesium Casting (AZ91D) 2.8 801 169
mpf-tka-tk4-pins-unified
TYPE TEST BASE PANEL MATERIAL DEPTH OF ENGAGEMENT (in.) INSTALLATION (lbs.) PULLOUT (lbs.)
TKA-10 ABS 0.0315 30 2
TKA-10 ABS 0.0394 30 3
TKA-10 ABS 0.0492 30 4
TKA-10 ABS 0.0590 40 6
TKA-10 ABS 0.0708 40 7
TKA-10 ABS 0.0787 50 8
TKA-10 ABS 0.0886 50 9
TKA-10 ABS 0.1102 55 12
TKA-10 Polycarbonate 0.0315 50 6
TKA-10 Polycarbonate 0.0394 60 8
TKA-10 Polycarbonate 0.0492 60 12
TKA-10 Polycarbonate 0.0590 70 15
TKA-10 Polycarbonate 0.0708 75 19
TKA-10 Polycarbonate 0.0787 85 22
TKA-10 Polycarbonate 0.0886 90 25
TK4-10 Polycarbonate 0.1102 95 33
TK4-10 Magnesium Casting (AZ91D) 0.0315 100 7
TK4-10 Magnesium Casting (AZ91D) 0.0394 110 10
TK4-10 Magnesium Casting (AZ91D) 0.0492 120 14
TK4-10 Magnesium Casting (AZ91D) 0.0590 130 18
TK4-10 Magnesium Casting (AZ91D) 0.0708 140 22
TK4-10 Magnesium Casting (AZ91D) 0.0787 150 25
TK4-10 Magnesium Casting (AZ91D) 0.0886 160 29
TK4-10 Magnesium Casting (AZ91D) 0.1102 180 38
mpf-ts4-fasteners-metric
TYPE TESTED TOP SHEET THICKNESS SHEET MATERIAL INSTALLATION (N) PULLOUT (N) TORQUE TO REMOVE (N•cm)
TS4-10-025 0.254 mm / .01" 5052-H34 Aluminum HRB 63 / HB 114 556 80 3.3
TS4-10-050 0.533 mm / .021" 5052-H34 Aluminum HRB 63 / HB 114 556 80 3.3
TS4-10-025 0.254 mm / .01" 304 Stainless Steel HRB 89/HB 187 1423 125 4.6
TS4-10-050 0.533 mm / .021" 304 Stainless Steel HRB 89/HB 187 1423 125 4.6
mpf-ts4-fasteners-unified
TYPE TESTED TOP SHEET THICKNESS SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.) TORQUE TO REMOVE (in. oz.)
TS4-10-025 0.254 mm / .01" 5052-H34 Aluminum HRB 63 / HB 114 125 18 4.7
TS4-10-050 0.533 mm / .021" 5052-H34 Aluminum HRB 63 / HB 114 125 18 4.7
TS4-10-025 0.254 mm / .01" 304 Stainless Steel HRB 89/HB 187 320 28 6.5
TS4-10-050 0.533 mm / .021" 304 Stainless Steel HRB 89/HB 187 320 28 6.5

在庫

販売業者 在庫 お問い合わせ 電話番号 住所 ロケーション

探索

何かをお探しですか?

私たちのウェブサイトは様々な方法で検索が可能です。部品番号または部品番号の一部を使用して、在庫や製品の仕様を検索いただけます。「在庫」や「製品仕様」などの単語を入力する必要はありません。
入力例:
部品番号の全体または一部を使った検索:「S-632-1ZI」、「CLS 632」 型式による検索:「CLS」、「FH」、「SO」 サイトコンテンツの検索:「セルフクリンチングナット」、「PEMスタッド」