SH-M8-2X
Type SH™ Hard Panel Nuts
SH-M8-2X
Type SH™ Hard Panel Nuts
- Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
- Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Smaller outer diameter
- Lighter weight
- Flush on reverse side of panel
- Close to edge of panel mounting
- No embossing required
- Hardened nut material provides stronger thread strength
- Can be installed automatically using press or in-die technology
Specifications
- Gewinde Code
- M8
- Thread Size
- M8 x 1.25
- Thread Size X Pitch
- M8 x 1,25
- Thread Specification
- 2B / ASME B1,13M, 6H, ASME B1,13M, Intern
- Shank Code
- 2
- Fastener Material
- Legierter Stahl, Gehärteter legierter Stahl
- Optional Finish
- Wenden Sie sich an den technischen Kundendienst, um die empfohlenen optionalen Beschichtungen zu ermitteln.
- Standard Finish
- Ohne Finish (mit Rostschutzöl)
- For Use in Sheet Hardness
- HRC 30 / HB 277 or Less
- Product Category
- Type SH™ Hard Panel Nuts
- CAD Supplier
- PennEngineering® (PEM®)
- CADPartID
- 103687
- Application Type
- Luft- und Raumfahrt, Automobil, Kfz-Elektronik, Nutzfahrzeuge, Datenkommunikation, Ladegeräte für Elektrofahrzeuge, Elektrofahrzeuge, Elektronik, Industriell, Fertigung; Blechverarbeitung, Marine, Medizinisch, Erneuerbare Energie, Telekommunikation
- Base Panel Material
- Aluminium, Harter Stahl, Wasserdichtheit
- Brand
- PEM
- Fastener Characteristics
- Außengewinde
- Industry
- Automobil, Kfz-Elektronik, Datacom und Telekommunikation, Elektrofahrzeuge, Industriell; Kommerziell, Medizinisch
- Installation Equipment/Method
- C-Frame Automatischer Vorschub / Feed, C-Rahmen Manueller Vorschub / Feed, Vollautomatische Verarbeitung
- PEM Product Family
- CL
- Product Type
- Muttern
- Technology Type
- Selbst-einpressend
- Unit (Metric/Unified)
- metrisch
- A Shank Max
- 2.21mm
- E ± 0.25_mm
- 12.7mm
- Hole Size in Sheet + 0.08_mm
- 10.5mm
- Min. Dist. Hole C/L to Edge_mm
- 9.7mm
- Min. Sheet Thickness_mm
- 2.29mm
- C Max._mm
- 10.47mm
- T ± 0.25_mm
- 5.47mm
Resources
Installation & Performance Data
TYPE | THREAD CODE | SHANK CODE | TEST SHEET THICKNESS & SHEET MATERIAL (mm) | SHEET HARDNESS HRC | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | |
---|---|---|---|---|---|---|---|---|
SH | M8 | 1 | 2.5 mm S700MC | 23 | 56.1 | 4600 | 30 | |
SH | M8 | 2 | 2.5 mm S700MC | 23 | 57.4 | 4900 | 30 |
Inventory
Vertriebspartner | Quantity | Kontakt | Telefonnummer | Adresse | Bürostandorte |
---|