FHLS-032-12

Low-Displacement Head Studs – Types FHL, FHLS

FHLS-032-12

Low-Displacement Head Studs – Types FHL, FHLS

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FHL (flush low-displacement head) Studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.- Installs closer to the edge of a sheet than PEM Type FH/FHS studs without causing that edge to bulge.

  • Flush-head for sheet thickness .040” and greater.
  • Type FHL is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
  • Type FHLS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.

Specifications

Thread Code
032
Thread Size
.190-32 (#10-32), #10-32
Thread Specification
2A, ANSI B1.1, External
Fastener Material
300 Series Stainless Steel
Material Code
S
Standard Finish
Passivated and/or tested, Passivated and/or tested per ASTM A380
For Use in Sheet Hardness
HRB 70 / HB 125 or Less
Length Code
12
Product Category
Low-Displacement Head Studs – Types FHL, FHLS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103708
Application Type
Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Threaded External
Industry
Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed, In-Die
PEM Product Family
FH
Product Type
Studs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Unified
H ± .015_in
.225in
Hole Size in Sheet + .003 – .000_in
.189in
L Len Pm 015in Or 4mm
.750in, 0.75in
Max. Hole in Attached Parts_in
.205in
Min. Dist. Hole C/L to Edge_in
.210in
Min. Sheet Thickness_in
.040in
S Max._in
.100in

Resources

Installation & Performance Data

fh-fhl-fhls-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.) PULL THRU TEST BUSHING HOLE SIZE (in.)
FHL, FHLS 032 7.9 .047" Aluminum 33 2500 115 18 395 .210
FHL, FHLS 032 16 .045" Steel 54 4500 210 38 800 .210

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”