Choose a sheet from the list below
- PEM® – REF/Fasteners For Use In Stainless Steel Sheets
(Subject: Installing PennEngineering® fasteners into stainless steel sheets)
- PEM® – REF/PEM® RT™ Thread Form
(Subject: Technical review of PEM® RT™ vibration resistant thread technology)
- PEM® – REF/Axial Thread Clearance
(Subject: Method for providing adequate axial thread clearance)
- PEM® – REF/Thread Galling
(Subject: Root causes and guidelines to promote optimized fastener performance)
- PEM® – REF/Choosing A Fastener Finish
(Subject: Metal fasteners in contact with metal panels)
- PEM® – REF/Repair And Replacement
(Subject: repair and replacement of self-clinching fasteners)
- PEM® – REF/Testing Clinch Performance
(Subject: testing clinch performance of self-clinching fasteners)
- PEM® – REF/Surface Finishing Sheet Metal Assemblies
(Subject: Surface finishing sheet metal assemblies with self-clinching fasteners)
- PEM® – REF/Thread Inspection
(Subject: Clarification of ANSI/ASME specifications as they relate to the inspection and gaging of PEM® fasteners)
- PEM® – REF/Solderability Shelf Life
(Subject: Shelf life considerations for electro-plated bright tin or electro-plated matte tin plated fasteners)
- PEM® – REF/Miniature Screw Threads
(Subject: The microPEM® line of fasteners introduces some new thread designations which may not be familiar to many users.)
- PEM® – REF/Machine Pressure to Force Conversion
(Subject: Discussion on how to estimate the installation force being generated by press equipment using the machine’s pressure setting and cylinder bore diameter.)
- PEM® – REF/Zinc Plating Appearance
(Subject: Brief on expectations of Appearance and Performance For Standard Zinc Plating.)
- PEM® – REF/Standoff Basics
(Subject: Proper use of PEM self-clinching standoffs including types SO, SOA, SOS, BSO, BSOA, BSOS, SO4, BSO4, TSO, TSOA, TSOS, DSO, DSOS, and MSO4.)
- PEM® – REF/NASM25027
(Outlines portions of NASM25027 locking torque specification that applies to PEM locking fasteners.)
- PEM® – REF/Thread Position
(Outlines self-centering aspects of PEM fasteners relative to the mounting hole.)
- PEM® – REF/C/L to Edge
(Outlines issues specific to mounting PEM fasteners close to the edge or bend of a sheet.)
