CSS-M5-25

Stainless Steel Standoffs – Types CSS, CSOS

CSS-M5-25

Stainless Steel Standoffs – Types CSS, CSOS

These standoffs ensure permanent mounting in metal sheets as thin as 1.60mm.

The fastener head is locked securely in a blind, milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installation to remain smooth.

Sheet preparation only requires a milled blind hole to the recommended minimum depth. Center-cutting end mills for hole preparation are available from PennEngineering. Installation of the concealed-head studs and standoffs is simple using a hollow anvil and solid punch. Place the head of the fastener in the hole and insert using any standard press. Displaced sheet metal flows smoothly around the head into the undercut.

Specifications

Thread Code
M5
Thread Size
M5 x 0.8
Thread Size X Pitch
M5 x 0.8
Thread Specification
6H, ANSI / ASME B1.13M, Internal
Shank
Short
Fastener Material
300 Series Stainless Steel
Material Code
S
Standard Finish
Passivated and/or tested, Passivated and/or tested per ASTM A380
For Use in Sheet Hardness
HRB 70 / HB 125 or Less
Length Code
25
Style
#3
Product Category
Stainless Steel Standoffs – Types CSS, CSOS
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103707
Application Type
Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Industrial, Manufacturing & Sheet Metal Fabrication, Medical, Telecom
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Threaded Internal
Industry
Automotive Electronics, Datacom & Telecom, Industrial & Commercial, Medical
Installation Equipment/Method
C-Frame Automatic Feed, C-Frame Manual Feed
PEM Product Family
CH
Product Type
Standoffs
Technology Type
Self-Clinching
Unit (Metric/Unified)
Metric
A Max._mm
1.04mm
B Max._mm
7.37mm
Blind Mounting Hole Diameter + 0.08_mm
8.74mm
H Nom._mm
9.53mm
L – Length + 0.05 –0.13_mm
25mm
Min. Depth Full Thread F_mm
9.6mm
Min. Depth of Blind Hole_mm
1.10mm
Min. Dist. Hole C/L to Edge_mm
7.2mm
Min. Sheet Thickness_mm
1.6mm
C Max._mm
8.72mm

Resources

Installation & Performance Data

ch-css-csos-standoffs-metric
TYPE THREAD CODE MAX. TIGHTENING TORQUE REF. (N•m) TEST SHEET MATERIAL INSTALLATION (kN) PULLOUT (N)
CSS M5 3.6 Cold-Rolled Steel 24.5 2000
CSS M5 3.6 5052-H34 Aluminum 22.2 1290

Inventory

Distributor Quantity Contact Phone Address Locations

Site Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”