FHS-137-14

Self-Clinching Pins – Type FH, FHS, FHA

FHS-137-14

Self-Clinching Pins – Type FH, FHS, FHA

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, or stainless steel . They are also available unthreaded on special order.- Flush-head for sheet thickness of .040” and greater.

  • Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
  • Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
  • Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” Scale) 50 or less and HB (Hardness Brinell) 82 or less.

Specifications

Fastener Material
300 Series Stainless Steel
Standard Finish
Passivated and/or tested
For Use in Sheet Hardness
HRB 70 / HB 125 or Less
Length Code
14
Product Category
Self-Clinching Pins – Type FH, FHS, FHA
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103720
PEM Product Family
FH
P Nominal Pin Diameter
0.137in
Unit (Metric/Unified)
Unified
H ± .015_in
0.23in
Hole Size in Sheet + .003 – .000_in
0.157in
L Len Pm 015in Or 4mm
0.875in
Min. Dist. Hole C/L to Edge_in
0.28in
Min. Sheet Thickness_in
0.04in
Pin Dia. Code
137
S Max._in
0.09in

Resources

Installation & Performance Data

fh-fh-fhs-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL THRU (N)
FH M2.5 0.78 1.6 mm Aluminum 29 8.9 465 1.0 2600
FHS M2.5 0.48 1.6 mm Aluminum 29 11.6 465 0.8 1820
FH M3 1.1 1.6 mm Aluminum 29 12.9 600 1.7 3150
FHS M3 0.81 1.6 mm Aluminum 29 12.9 600 1.3 2570
FH M3.5 1.6 1.6 mm Aluminum 29 15.6 800 1.7 3780
FHS M3.5 1.3 1.6 mm Aluminum 29 15.6 800 1.7 3445
FH M4 2.1 1.6 mm Aluminum 29 20 975 2.9 4448
FHS M4 1.8 1.6 mm Aluminum 29 22.3 975 2.9 4180
FH M5 3.1 1.6 mm Aluminum 29 24.5 1070 3.5 5170
FHS M5 2.5 1.6 mm Aluminum 29 24.5 1070 3.5 4760
FH M6 7.3 2.4 mm Aluminum 28 28.9 1660 7.3 10200
FHS M6 5.7 2.4 mm Aluminum 28 28.9 1660 7.3 9090
FH M8 10 2.4 mm Aluminum 28 29.8 1910 11.3 10500
FHS M8 8 2.4 mm Aluminum 28 29.8 1910 11.3 9540
FH M2.5 0.84 1.5 mm Steel 59 11.1 740 1.0 2800
FHS M2.5 0.48 1.5 mm Steel 59 13.8 740 0.8 1820
FH M3 1.4 1.5 mm Steel 59 14.7 820 1.7 3840
FHS M3 0.77 1.5 mm Steel 59 14.7 820 1.3 2440
FH M3.5 1.6 1.5 mm Steel 59 22.3 1335 2.8 3780
FHS M3.5 1.3 1.5 mm Steel 59 22.3 1335 2.0 3445
FH M4 2.7 1.5 mm Steel 59 28.9 1780 4.2 5650
FHS M4 2 1.5 mm Steel 59 26.7 1780 2.9 4775
FH M5 3.8 1.5 mm Steel 59 33.4 2000 6.5 6270
FHS M5 3.2 1.5 mm Steel 59 32.5 2000 6.3 6000
FH M6 8.1 2.2 mm Steel 46 44.5 2560 11.3 11300
FHS M6 6.7 2.2 mm Steel 46 44.5 2560 10.1 10600
FH M8 15 2.4 mm Steel 46 44.5 2890 19.2 15450
FHS M8 11 2.4 mm Steel 46 49.8 2890 17.5 13630
fh-fh-fhs-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.)
FH 256 4.4 .062" Aluminum 29 2000 100 5 425
FHS 256 2.7 .062" Aluminum 29 2000 100 4.5 300
FH 440 8.7 .064" Aluminum 29 3800 170 10 650
FHS 440 5.9 .064" Aluminum 29 3200 170 8 500
FH 632 14 .064" Aluminum 29 3800 180 17 850
FHS 632 11 .064" Aluminum 29 3500 180 16 775
FH 832 20 .064" Aluminum 29 4800 220 28 1000
FHS 832 16 .064" Aluminum 29 4500 220 28 940
FH 024/032 28 .064" Aluminum 29 5500 270 30 1220
FHS 024/032 24 .064" Aluminum 29 5500 270 30 1220
FH 0420 69 .093" Aluminum 28 6500 310 65 2300
FHS 0420 55 .093" Aluminum 28 6500 310 65 2100
FH 0518 85 .093" Aluminum 28 6500 430 100 2260
FHS 0518 74 .093" Aluminum 28 6700 430 100 2260
FH 256 4.4 .060" Steel 59 2500 180 5 425
FHS 256 2.7 .060" Steel 59 2500 180 4.5 300
FH 440 8.7 .060" Steel 59 4300 275 10 650
FHS 440 5.9 .060" Steel 59 4700 275 8 500
FH 632 14 .060" Steel 59 4700 300 20 850
FHS 632 11 .060" Steel 59 5000 300 16 775
FH 832 25 .060" Steel 59 6800 375 40 1270
FHS 832 19 .060" Steel 59 5500 375 28 1130
FH 024/032 32 .060" Steel 59 7500 450 60 1410
FHS 024/032 28 .060" Steel 59 6800 450 50 1410
FH 0420 77 .088" Steel 46 9500 575 100 2550
FHS 0420 67 .088" Steel 46 10000 575 100 2550
FH 0518 130 .093" Steel 46 10000 650 175 3475
FHS 0518 102 .093" Steel 46 11200 650 175 3120
fh-fh4-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL THRU (N)
FH4 M3 1.3 1.5 mm Stainless Steel 87 40 2220 1.8 3500
FH4 M4 3.8 1.5 mm Stainless Steel 86 50 3210 6.5 8000
FH4 M5 6 1.5 mm Stainless Steel 86 53 3560 10.7 10000
FH4 M6 11 1.6 mm Stainless Steel 88 100 4200 15.9 14900
fh-fh4-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.)
FH4 440 11 .060" Stainless Steel 87 9000 450 16 800
FH4 632 22 .060" Stainless Steel 87 9500 540 27 1350
FH4 832 35 .060" Stainless Steel 86 11200 780 58 1800
FH4 032 51 .060" Stainless Steel 86 12000 800 95 2250
FH4 0420 117 .062" Stainless Steel 88 23000 1600 156 3900
fh-fha-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HR15T INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL THRU (N)
FHA M3 0.54 1.55 mm 5052-H34 Aluminum 74 10.7 575 0.5 1500
FHA M4 0.96 1.55 mm 5052-H34 Aluminum 75 14.3 775 1.35 2000
FHA M5 1.5 1.55 mm 5052-H34 Aluminum 75 15.2 900 2.6 2500
FHA M6 3.2 1.6 mm 5052-H34 Aluminum 75 24.5 1500 5.3 4500
fh-fha-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HR15T INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.)
FHA 440 3.6 .061" 5052-H34 Aluminum 75 2500 155 4 270
FHA 632 6.3 .061" 5052-H34 Aluminum 75 2600 180 8 380
FHA 832 9.8 .061" 5052-H34 Aluminum 73 3200 190 15 500
FHA 032 14 .061" 5052-H34 Aluminum 75 3200 220 28 600
FHA 0420 32 .062" 5052-H34 Aluminum 75 5500 300 55 1050
fh-fhl-fhls-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL THRU (N) PULL THRU TEST BUSHING HOLE SIZE (mm)
FHL, FHLS M2.5 0.32 1.2 mm Aluminum 33 3.1 285 0.55 1200 3
FHL, FHLS M3 0.41 1.2 mm Aluminum 33 4.4 285 0.65 1300 3.5
FHL, FHLS M3.5 0.51 1.2 mm Aluminum 33 4.4 290 0.76 1400 4
FHL, FHLS M4 0.65 1.2 mm Aluminum 33 5.3 365 1.1 1550 4.5
FHL, FHLS M5 0.97 1.2 mm Aluminum 33 11.1 530 2.2 1850 5.5
FHL, FHLS M2.5 0.59 1.1 mm Steel 54 5.3 450 1.1 2250 3
FHL, FHLS M3 0.79 1.1 mm Steel 54 5.3 475 1.25 2500 3.5
FHL, FHLS M3.5 1.03 1.1 mm Steel 54 6.6 500 1.75 2800 4
FHL, FHLS M4 1.39 1.1 mm Steel 54 6.6 550 2.1 3300 4.5
FHL, FHLS M5 1.97 1.1 mm Steel 54 20 1000 4.4 3750 5.5
fh-fhl-fhls-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.) PULL THRU TEST BUSHING HOLE SIZE (in.)
FHL, FHLS 256 2.1 .047" Aluminum 33 700 55 4 230 .106
FHL, FHLS 440 3.5 .047" Aluminum 33 1000 60 5 300 .132
FHL, FHLS 632 4.7 .047" Aluminum 33 1000 65 6.5 325 .158
FHL, FHLS 832 6 .047" Aluminum 33 1200 80 9 350 .184
FHL, FHLS 032 7.9 .047" Aluminum 33 2500 115 18 395 .210
FHL, FHLS 256 3.8 .045" Steel 54 1200 85 8 425 .106
FHL, FHLS 440 6.8 .045" Steel 54 1200 105 11 580 .132
FHL, FHLS 632 9 .045" Steel 54 1500 110 15 650 .158
FHL, FHLS 832 13 .045" Steel 54 1500 125 18 740 .184
FHL, FHLS 032 16 .045" Steel 54 4500 210 38 800 .210
fh-fhp-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL THRU (N)
FHP M3 1.3 2 mm Stainless Steel 86 40 2500 1.6 3500
FHP M4 2.9 1.14 mm Stainless Steel 86 50 3000 3.9 6000
FHP M5 4.4 1.14 mm Stainless Steel 86 53 3560 7.35 7320
fh-fhp-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.)
FHP 440 8.1 .045" Stainless Steel 86 9000 520 10.6 605
FHP 632 16 .045" Stainless Steel 86 9500 670 19.5 940
FHP 832 28 .045" Stainless Steel 86 11200 785 37.5 1415
FHP 032 34 .045" Stainless Steel 86 12000 800 59.5 1500
fh-fhx-studs-metric
TYPE THREAD CODE TEST SHEET THICKNESS & MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
FHX X5 1.1 mm Steel HRB 58 / HB 104 24.9 1519 4.7
FHX X5 1.2 mm Aluminum HRB 44 / HB 66 19.2 1070 3.2
FHX X6 1.6 mm Steel HRB 58 / HB 104 35.6 2964 13.3
FHX X6 1.6 mm Aluminum HRB 44 / HB 66 29.4 1623 7
fh-hfe-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) TENSILE STRENGTH (kN) PULL THRU (N) PULL THRU TEST BUSHING HOLE SIZE (mm)
HFE M5 5.8 1 mm Aluminum 27 37.7 690 8.1 12.8 9.7 7.4
HFE M6 10 1 mm Aluminum 27 39 750 11.8 18.1 14.2 8.2
HFE M8 24 1.5 mm Aluminum 22 42 1230 23.5 32.9 25 10.3
HFE M5 6.4 1 mm Cold-rolled Steel 67 51.1 1350 8.1 12.8 10.6 7.4
HFE M6 11 1 mm Cold-rolled Steel 67 60 1400 14.4 18.1 15.5 8.2
HFE M8 26 1 mm Cold-rolled Steel 65 71.1 2400 33.9 32.9 27.5 10.3
fh-hfe-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (ft. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) TENSILE STRENGTH (lbs.) PULL THRU (lbs.) TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.)
HFE 032 3.6 .040" Aluminum 27 7500 170 60 2400 1900 .279
HFE 0420 8 .040" Aluminum 27 8000 180 120 3820 3200 .335
HFE 0518 19 .060" Aluminum 22 9000 275 240 6280 6000 .407
HFE 032 4.2 .040" Cold-rolled Steel 67 9500 300 60 2400 2200 .279
HFE 0420 9 .040" Cold-rolled Steel 67 13500 340 130 3820 3600 .335
HFE 0518 20 .060" Cold-rolled Steel 65 15500 575 290 6280 6280 .407
fh-hfg8-hf109-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TENSILE STRENTH (kN) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
HF109 M5 10 14.8 1.2 mm HSLA Steel 86.1 60.1 2084 9
HF109 M6 17 20.9 1.2 mm HSLA Steel 85.6 90 2454 15.6
HF109 M8 41 38.1 1.5 mm HSLA Steel 84 145 3026 38.4
HF109 M5 10 14.8 1 mm Cold-rolled Steel 45.3 43.2 978 9
HF109 M6 17 20.9 1 mm Cold-rolled Steel 45.5 60 1072 14.4
HF109 M8 41 38.1 1.5 mm Cold-rolled Steel 55 85 1992 37.7
fh-hfg8-hf109-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (ft. lbs.) TENSILE STRENTH (lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (ft. lbs.)
HFG8 032 6.4 3000 .047" HSLA Steel 85.5 14000 483 6.2
HFG8 0420 13 4750 .047" HSLA Steel 85.7 21400 592 11.5
HFG8 0518 28 7850 .060" HSLA Steel 84.9 32600 667 25.6
HFG8 032 6.4 3000 0.040" Cold-rolled Steel 45.0 9900 249 5.9
HFG8 0420 13 4750 0.040" Cold-rolled Steel 45.0 14100 248 11.5
HFG8 0518 28 7850 0.040" Cold-rolled Steel 55.2 19100 447 25.2
fh-hfh-hfhs-hfhb-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) TENSILE STRENGTH (kN)
HFH M5 7.7 1.5 mm Aluminum 15 13 800 5.4 12.8
HFH M5 7.7 1.5 mm Steel 65 26 1500 7.6 12.8
HFHS M5 3.8 1.62 mm Aluminum 35 12.4 800 5.4 7.3
HFHS M5 3.8 1.47 mm Steel 54 21.7 1500 6.4 7.3
HFHB M5 2.7 1.5 mm Copper CDA-110 28 15.6 1115 3.4 5.9
HFH M6 13 1.5 mm Aluminum 43 29 1270 14 18.1
HFH M6 13 1.5 mm Steel 59 33 1750 14 18.1
HFHS M6 6.5 1.62 mm Aluminum 35 15.4 1270 11 10.3
HFHS M6 6.5 1.6 mm Steel 45 24.6 1750 11 10.3
HFHB M6 4.5 1.5 mm Copper CDA-110 28 25.3 1600 6.7 8.3
HFH M8 32 2.3 mm Aluminum 39 35.6 1700 30 32.9
HFH M8 32 2.3 mm Steel 58 44.5 2200 30 32.9
HFHS M8 16 2.23 mm Aluminum 44 24.4 1700 20 18.8
HFHS M8 16 2.48 mm Steel 43 37.8 2100 20 18.8
HFHB M8 11 3.2 mm Copper CDA-110 32 33 2250 15.3 15.1
HFH M10 63 2.3 mm Aluminum 39 53.3 2445 36 52.2
HFH M10 63 2.3 mm Steel 58 71.2 3470 49 52.2
HFHS M10 31 2.3 mm Aluminum 44 44.4 2445 36 29.9
HFHS M10 31 2.3 mm Steel 44 57.7 3470 36 29.9
HFHB M10 22 3.2 mm Copper CDA-110 32 53.3 2500 25 24
fh-hfh-hfhs-hfhb-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (ft. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) TENSILE STRENGTH (lbs.)
HFH 032 4.6 .060" Aluminum 15 3000 180 4 2400
HFH 032 4.6 .060" Steel 65 6000 375 5 2400
HFHS 032 2.5 .050" Aluminum 38 3000 180 4 1500
HFHS 032 2.5 .058" Steel 52 4500 325 4 1500
HFHB 032 1.7 .061" Copper CDA-110 28 3400 150 2.9 1200
HFH 0420 9.6 .060" Aluminum 43 5500 285 11 3820
HFH 0420 9.6 .060" Steel 59 7000 480 11 3820
HFHS 0420 5.2 .064" Aluminum 32 4000 285 8 2385
HFHS 0420 5.2 .072" Steel 43 6500 480 8 2385
HFHB 0420 3.6 .061" Copper CDA-110 28 6000 380 5 1908
HFH 0518 20 .091" Aluminum 39 8000 380 22 6280
HFH 0518 20 .090" Steel 58 10000 590 22 6280
HFHS 0518 11 .087" Aluminum 41 5500 380 15 3930
HFHS 0518 11 .099" Steel 44 7500 590 15 3930
HFHB 0518 7 .126" Copper CDA-110 32 7500 500 11 3140
HFH 0616 35 .091" Aluminum 39 12000 550 25 9300
HFH 0616 35 .090" Steel 58 16000 780 36 9300
HFHS 0616 19 .123" Aluminum 44 10000 560 25 5810
HFHS 0616 19 .099" Steel 44 13000 780 25 5810
HFHB 0616 13 .126" Copper CDA-110 32 12000 560 18 4650
fh-hflh-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) TENSILE STRENGTH (kN) PULL-THRU (kN) TEST BUSHING HOLE SIZE FOR PULL THRU TESTS
HFLH M5 6.4 1 mm HC500LA 89 51.1 1350 8.1 12.8 10.6 7.4
HFLH M6 11 1 mm HC500LA 89 60 1400 14.4 18.1 15.5 8.2
HFLH M8 26 1.5 mm HC500LA 91 71.1 2400 33.9 32.9 27.5 10.3
fh-hflh-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (ft. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) TENSILE STRENGTH (lbs.) PULL-THRU (lbs.) TEST BUSHING HOLE SIZE FOR PULL THRU TESTS
HFLH 032 4.2 .040" HC500LA 89 9500 300 60 2400 2200 0.279
HFLH 0420 10 .040" HC500LA 89 13500 340 130 3820 3600 0.335
HFLH 0518 23 .060" HC500LA 91 16000 575 290 6280 6280 0.407
fh-sgpc-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL-THRU (N)
SGPC M2.5 0.67 Single Sheet of 1 mm 300 Series Stainless Steel 20.1 2546 0.86 2561
SGPC M3 0.9 Single Sheet of 1 mm 300 Series Stainless Steel 21.8 2051 1.35 2851
SGPC M4 2.5 Single Sheet of 1 mm 300 Series Stainless Steel 28.5 2396 2.66 4000
SGPC M5 3.3 Single Sheet of 1 mm 300 Series Stainless Steel 35.6 3200 5.96 4284
SGPC M6 3.3 Single Sheet of 1 mm 300 Series Stainless Steel 42.3 3262 9.19 6311
fh-sgpc-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL-THRU (lbs.)
SGPC 256 3.7 Single Sheet of .039" 300 Series Stainless Steel 4000 425 5.2 415
SGPC 440 6 Single Sheet of .039" 300 Series Stainless Steel 5000 450 8 512
SGPC 632 12 Single Sheet of .039" 300 Series Stainless Steel 5500 460 15.8 811
SGPC 832 20 Single Sheet of .039" 300 Series Stainless Steel 6500 480 29.3 1133
SGPC 032 25 Single Sheet of .039" 300 Series Stainless Steel 7300 545 42.8 1273
SGPC 0420 45 Single Sheet of .039" 300 Series Stainless Steel 10000 565 76.7 1721
fh-tfh-tfhs-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL THRU (N) PULL THRU TEST BUSHING HOLE SIZE (mm)
TFH M3 1.1 0.65 mm Aluminum 42 5.8 370 0.72 3091 3.51
TFHS M3 0.93 0.65 mm Aluminum 43 5.8 255 0.19 2962 3.51
TFH M4 1.9 0.65 mm Aluminum 42 14.2 396 1.29 3963 4.5
TFHS M4 1.7 0.65 mm Aluminum 40 9.8 391 1.83 4126 4.5
TFH M5 2.8 0.64 mm Aluminum 42 3.2 499 1.71 4720 5.51
TFHS M5 2.6 0.64 mm Aluminum 42 3.2 518 2.29 4977 5.51
TFH M3 1.3 0.57 mm Steel 57 8 419 1.32 3477 3.51
TFHS M3 0.94 0.57 mm Steel 57 6.7 394 0.84 2971 3.51
TFH M4 2.1 0.57 mm Steel 57 17.8 453 1.69 4380 4.5
TFHS M4 2 0.57 mm Steel 57 13.4 460 2.49 4701 4.5
TFH M5 3.4 0.56 mm Steel 57 12.1 570 2.77 5654 5.51
TFHS M5 2.8 0.57 mm Steel 57 12.9 582 2.9 5328 5.51
fh-tfh-tfhs-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (in. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL THRU (lbs.) PULL THRU TEST BUSHING HOLE SIZE (in.)
TFH 440 9.2 .025" Aluminum 38 1300 75 10 683 .132
TFHS 440 6.2 .025" Aluminum 38 1200 75 8 527 .132
TFH 632 13 .025" Aluminum 41 2400 87 9 791 .158
TFHS 632 11 .025" Aluminum 41 2400 88 12 748 .158
TFH 832 19 .025" Aluminum 41 2100 94 14 943 .184
TFHS 832 17 .025" Aluminum 41 2200 94 17 963 .184
TFH 024/032 24 .025" Aluminum 38 2300 98 13 1033 .210
TFHS 024/032 21 .025" Aluminum 38 2500 101 12 1040 .210
TFH 440 9.2 .022" Steel 57 2800 85 10 684 .132
TFHS 440 6.2 .022" Steel 57 1500 80 9 531 .132
TFH 632 15 .022" Steel 57 2800 97 14 906 .158
TFHS 632 11 .022" Steel 57 2800 100 16 750 .158
TFH 832 21 .022" Steel 57 3500 111 23 1065 .184
TFHS 832 19 .022" Steel 57 2700 113 26 1109 .184
TFH 024/032 28 .022" Steel 57 3900 121 25 1214 .210
TFHS 024/032 24 .022" Steel 57 3200 112 23 1184 .210
fh-thfe-studs-metric
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (N•m) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) TENSILE STRENGTH (kN) PULL THRU (N) PULL THRU TEST BUSHING HOLE SIZE (mm)
THFE M6 9 0.8 mm Aluminum 38 39.2 550 7.3 18.1 13 8.3
THFE M8 27 0.8 mm Aluminum 44 56 582 12.2 32.9 27.8 10.3
THFE M6 10 0.8 mm Cold-rolled Steel 47 60.1 886 13.4 18.1 14.3 8.3
THFE M8 27 0.8 mm Cold-rolled Steel 47 71.2 881 13.1 32.9 28.1 10.3
fh-thfe-studs-unified
TYPE THREAD CODE REC. NUT TIGHTENING TORQUE (ft. lbs.) TEST SHEET THICKNESS & MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) TENSILE STRENGTH (lbs.) PULL THRU (lbs.) TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.)
THFE 0420 8.1 .031" Aluminum 35 8800 116 71 3820 3249 .340
THFE 0518 18 .031" Aluminum 44 11700 131 103 6280 5701 0.402
THFE 0420 8.5 .031" Cold-rolled Steel 47 13500 197 116 3820 3388 .340
THFE 0518 18 .031" Cold-rolled Steel 47 16000 187 124 6280 5772 .402
fh-tp4-pins-metric
TYPE PIN DIA. CODE TEST SHEET MATERIAL INSTALLATION (kN) PUSHOUT (N)
TP4 3MM 300 Series Stainless Steel 35 1556
TP4 4MM 300 Series Stainless Steel 45 2335
TP4 5MM 300 Series Stainless Steel 54 2535
TP4 6MM 300 Series Stainless Steel 60 2891
fh-tp4-pins-unified
TYPE PIN DIA. CODE TEST SHEET MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.)
TP4 125 300 Series Stainless Steel 8000 350
TP4 187 300 Series Stainless Steel 12000 570
TP4 250 300 Series Stainless Steel 14000 650
fh-tps-pins-metric
TYPE PIN DIA. CODE TEST SHEET MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (kN)
TPS 3MM Aluminum 22 12 0.56
TPS 3MM Steel 65 22 0.98
TPS 4MM Aluminum 19 22 0.89
TPS 4MM Steel 66 26.4 1.54
TPS 5MM Aluminum 18 28.6 1.01
TPS 5MM Steel 60 35.2 1.76
TPS 6MM Aluminum 18 30.8 1.1
TPS 6MM Steel 62 39.6 2.1
fh-tps-pins-unified
TYPE PIN DIA. CODE TEST SHEET MATERIAL SHEET HARDNESS HRB INSTALLATION (lbs.) PUSHOUT (lbs.)
TPS 125 Aluminum 20 4500 150
TPS 125 Steel 62 6500 250
TPS 187 Aluminum 18 6500 230
TPS 187 Steel 60 8000 400
TPS 250 Aluminum 18 7000 270
TPS 250 Steel 62 9000 500
fh-tpxs-pins-metric
TYPE PIN DIA. CODE TEST SHEET MATERIAL SHEET HARDNESS HRB INSTALLATION (kN) PUSHOUT (kN)
TPXS 3MM Aluminum 22 12 0.56
TPXS 3MM Steel 65 22 0.98

Inventory

Distributor Quantity Contact Phone Address Locations

Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”