S-RT0518-2ZI
All Metal, RT® Free-Running Locknuts
S-RT0518-2ZI
All Metal, RT® Free-Running Locknuts
PEM® S-RT™ free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.
- Screw turns freely until a clamp load is applied.
- Resistant to vibrational loosening.
- Back side of panel is flush or sub-flush for screw installation.
- Locking feature reusability is not affected by number of on/off cycles.
- Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin CL.
Specifications
- Thread Code
- RT0518
- Thread Size
- 5/16-18
- Thread Specification
- Modified thread form on loaded flank. Will accept a maximum material 6g screw.
- Shank Code
- 2
- Fastener Material
- Carbon Steel, Hardened Carbon Steel
- Standard Finish
- colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633, Zinc plus Clear Chromate
- For Use in Sheet Hardness
- HRB 80 / HB 150 or less
- Product Category
- All Metal, RT® Free-Running Locknuts
- CAD Supplier
- PennEngineering® (PEM®)
- CADPartID
- 103686
- Application Type
- Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Consumer Electronics, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
- Base Panel Material
- Aluminum, Steel
- Brand
- PEM
- Fastener Characteristics
- Locking, Threaded Internal
- Industry
- Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical
- PEM Product Family
- CL, LN
- Product Type
- Nuts
- Technology Type
- Self-Clinching
- Unit (Metric/Unified)
- Unified
- A Shank Max
- .087in, 0.087in
- E ± .010_in
- .500in
- Hole Size in Sheet + .003 – .000_in
- .413in
- Min. Dist. Hole C/L to Edge_in
- .38in
- C Max._in
- .412in
- Rec. Min. Sheet Thickness_in
- .090in
- T ± .010_in
- .230in
Resources
Installation & Performance Data
TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | |
---|---|---|---|---|---|---|---|
S | RT0518 | 1 | 5052-H34 Aluminum | 4000-7000 | 380 | 120 | |
S | RT0518 | 2 | 5052-H34 Aluminum | 4000-7000 | 380 | 160 | |
S | RT0518 | 1 | Cold-Rolled Steel | 6000-8000 | 420 | 165 | |
S | RT0518 | 2 | Cold-Rolled Steel | 6000-8000 | 420 | 180 |
TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | ||||
---|---|---|---|---|---|---|---|---|---|---|
S | RT0518 | 1 | 5052-H34 Aluminum | 4000-7000 | 380 | 120 | ||||
S | RT0518 | 2 | 5052-H34 Aluminum | 4000-7000 | 380 | 160 | ||||
S | RT0518 | 1 | Cold-Rolled Steel | 6000-8000 | 420 | 165 | ||||
S | RT0518 | 2 | Cold-Rolled Steel | 6000-8000 | 420 | 180 |
Inventory
Distributor | Quantity | Contact | Phone | Address | Locations |
---|