S-RTM6-1ZC

All Metal, RT® Free-Running Locknuts

S-RTM6-1ZC

All Metal, RT® Free-Running Locknuts

PEM® S-RT™ free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.

  • Screw turns freely until a clamp load is applied.
  • Resistant to vibrational loosening.
  • Back side of panel is flush or sub-flush for screw installation.
  • Locking feature reusability is not affected by number of on/off cycles.
  • Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin CL.

Specifications

Thread Code
RTM6
Thread Size
M6 x 1
Thread Specification
Modified thread form on loaded flank. Will accept a maximum material 6g screw.
Shank Code
1
Fastener Material
Carbon Steel
Optional Finish
SC1 (5µm), Type II, yellow, Zinc plated per ASTM B633
For Use in Sheet Hardness
HRB 80 / HB 150 or less
Product Category
All Metal, RT® Free-Running Locknuts
CAD Supplier
PennEngineering® (PEM®)
CADPartID
103687
Application Type
Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Consumer Electronics, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
Base Panel Material
Aluminum, Steel
Brand
PEM
Fastener Characteristics
Locking, Threaded Internal
Industry
Automotive, Automotive Electronics, Datacom & Telecom, Defense, Electric Vehicles, Industrial & Commercial, Medical
PEM Product Family
CL, LN
Product Type
Nuts
Technology Type
Self-Clinching
Unit (Metric/Unified)
Metric
A Shank Max
1.38mm
E ± 0.25_mm
11.18mm
Hole Size in Sheet + 0.08_mm
8.75mm
Min. Dist. Hole C/L to Edge_mm
8.6mm
C Max._mm
8.73mm
Rec. Min. Sheet Thickness_mm
1.4mm
T ± 0.25_mm
4.08mm

Resources

Installation & Performance Data

cl-s-ss-nuts-metric
TYPE THREAD CODE SHANK CODE TEST SHEET MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
S RTM6 00 5052-H34 Aluminum 18-32 750 6.5
S RTM6 0 5052-H34 Aluminum 18-32 970 7.9
S RTM6 1 5052-H34 Aluminum 18-32 1580 10.2
S RTM6 2 5052-H34 Aluminum 18-32 1580 14.1
S RTM6 00 Cold-Rolled Steel 27-36 900 10
S RTM6 0 Cold-Rolled Steel 27-36 1380 13
S RTM6 1 Cold-Rolled Steel 27-36 1760 17
S RTM6 2 Cold-Rolled Steel 27-36 1760 17
ln-s-nuts-metric
TYPE THREAD CODE SHANK CODE TEST SHEET MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
S RTM6 00 5052-H34 Aluminum 18-32 750 6.5
S RTM6 0 5052-H34 Aluminum 18-32 970 7.9
S RTM6 1 5052-H34 Aluminum 18-32 1580 10.2
S RTM6 2 5052-H34 Aluminum 18-32 1580 14.1
S RTM6 00 Cold-Rolled Steel 27-36 900 10
S RTM6 0 Cold-Rolled Steel 27-36 1380 13
S RTM6 1 Cold-Rolled Steel 27-36 1760 17
S RTM6 2 Cold-Rolled Steel 27-36 1760 17

Inventory

Distributor Quantity Contact Phone Address Locations

Search

What are you looking for?

You can search our website in different ways. You can search for inventory or product specifications using the full part number or partial part number. You don’t even need to type the words “inventory” or "product spec"!
Examples of what to type:
Full or partial part number: “S-632-1ZI”, “CLS 632” Type: “CLS”, “FH”, “SO” Website content: “Self-clinching Nuts” or “PEM studs”