SH-M8-2X
Type SH™ Hard Panel Nuts
SH-M8-2X
Type SH™ Hard Panel Nuts
- Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
- Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Smaller outer diameter
- Lighter weight
- Flush on reverse side of panel
- Close to edge of panel mounting
- No embossing required
- Hardened nut material provides stronger thread strength
- Can be installed automatically using press or in-die technology
Specifications
- Thread Code
- M8
- Thread Size
- M8 x 1.25
- Thread Size X Pitch
- M8 x 1.25
- Thread Specification
- 2B / ASME B1.13M, 6H, ASME B1.1, Internal
- Shank Code
- 2
- Fastener Material
- Alloy Steel, Hardened Alloy Steel
- Optional Finish
- Consult technical support for recommended optional finishes.
- Standard Finish
- No Finish (with Rust Preventative Oil)
- For Use in Sheet Hardness
- HRC 30 / HB 277 or Less
- Product Category
- Type SH™ Hard Panel Nuts
- CAD Supplier
- PennEngineering® (PEM®)
- CADPartID
- 103687
- Application Type
- Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
- Base Panel Material
- Aluminum, Hard Steel, Steel
- Brand
- PEM
- Fastener Characteristics
- Threaded Internal
- Industry
- Automotive, Automotive Electronics, Datacom & Telecom, Defense, Electic Vehicles, Electric Vehicles, Industrial & Commercial, Medical
- Installation Equipment/Method
- C-Frame Automatic Feed, C-Frame Manual Feed, In-Die
- PEM Product Family
- CL
- Product Type
- Nuts
- Technology Type
- Self-Clinching
- Unit (Metric/Unified)
- Metric
- A Shank Max
- 2.21mm
- E ± 0.25_mm
- 12.7mm
- Hole Size in Sheet + 0.08_mm
- 10.5mm
- Min. Dist. Hole C/L to Edge_mm
- 9.7mm
- Min. Sheet Thickness_mm
- 2.29mm
- C Max._mm
- 10.47mm
- T ± 0.25_mm
- 5.47mm
Resources
Installation & Performance Data
| TYPE | THREAD CODE | SHANK CODE | TEST SHEET THICKNESS & SHEET MATERIAL (mm) | SHEET HARDNESS HRC | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | |
|---|---|---|---|---|---|---|---|---|
| SH | M8 | 1 | 2.5 mm S700MC | 23 | 56.1 | 4600 | 30 | |
| SH | M8 | 2 | 2.5 mm S700MC | 23 | 57.4 | 4900 | 30 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|